Binatone 710 manual Answering Machine system, Messages, Ogm, To play the current

The display shows

10. Answering Machine system

Outgoing	An OGM is the announcement callers will hear when
Messages	the machine answers a call.TheSpirit 710 has two
(OGM)	pre-recorded announcements available if you choose
	not to record your own OGMs.

„OGM1 - this invites callers to leave a message after the tone. The default is “Please leave your message after the beep”.

„OGM2 - this informs callers to call later and does not give them the opportunity to leave a message. The default is,“Please call later.”

The machine has enough memory to record about 20 minutes of messages

(OGM/Caller’s message/Memo),up to a maximum of 59 messages.When there is no further memory available to record, it will answer after 15rings and the machine will announce,“ Memory full,please call later..”

MEMORY FULL and it will be shown

alternately with	X X	and	X X
	M E S S A G E S		N E W

NOTE: You will need to delete some messages before that answering machine can be turned on again.

To play the current

OGM

Make sure the machine is switched on;

Press the OGM button.

ÖThe display shows PLAY OGM, and plays the current announcement.

To record OGM 1

1

2

3

4

Make sure the answering machine is turned on.

Note: Each OGM must be at least 3 seconds and no more than 1 minute in length.

Press the EXIT/ON-OFF button briefly until you hear, “Announcement 1.”

Press and hold the OGM button until you hear a‘beep.’

ÖThe display shows OGM RECORDING and the message counter starts to count.

Start recording your OGM1. Speak directly into the Base unit’s Microphone from a distance of about 15 cms. (6 inches).

As soon as you have finished speaking, press the EXIT/ON-OFF button to stop recording.

ÖThe display shows PLAY OGM, and your recorded message will be played back for your approval.

Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.

20