Avaya 3600 manual Making Calls, Locking/Unlocking your Phone, System Feature Activation

Page 15

Basic Operation

Making Calls

To make a call (or go off-hook):

Press Start Call and then dial the required number.

To make a call by selecting a line:

If multiple lines are available, your phone system may require you to select a line before dialing a number.

Press LINE and the number of the line you wish to use. A dial tone is heard.

Locking/Unlocking your Phone

To lock your phone's keypad:

1.Press FCN and then press Select.

2.From the standby menu, press Lock.

To unlock your phone's keypad:

Press Unlk and then press #.

System Feature Activation

Features that have been programmed in your system, can be viewed and activated through the Shortcut menu and Softkey functions.

To use the Shortcut menu:

1.Press Start Call and then press FCN. The feature menu is displayed. The Shortcut menu lists the feature shortcut, if any, and the feature description.

2.To scroll through the features, press Up and Down. The feature abbreviation is highlighted in the softkey function display area.

3.To activate a feature (when the option is highlighted), press Select.

Programmed features may have 1-9, *, 0 or # in the left column of the Shortcut menu. This designates the shortcut key that activates that feature.

To activate a feature using a shortcut key:

From the Shortcut menu, press the shortcut key. The feature will activate whether or not that feature is currently displayed or highlighted.

Note

If there is no shortcut key displayed, the feature does not have an associated shortcut. This is generally the case with primary level softkey functions, such as Transfer or Conference.

3600 Series Wireless User Guide	Page 11
IP Office	[15-601104] Issue [1] (1 June 2006)

Image 15

Contents IP Office Table Of Contents Iii Table Of ContentsPage Copyright Series Wireless User Guide IP Office Issue 1 1 JuneAbout this Guide Wireless PhoneOverview Important Information about your Phone3616/3620 Wireless Phone Select Power On/Start CallPower Off/End Call Battery3626 Wireless Phone Push-to-Talk Radio Control To make a call Press Start Call Active Mode Modes of Operation Modes of OperationStandby Mode Push-to-Talk ModeBasic Operation Turning the Phone On/OffAnswering Calls System Feature Activation Making CallsLocking/Unlocking your Phone To silence your ringing phone Volume SettingsTo change the speaker volume whilst on a call VoicemailMute Using the SoftkeysConf HoldMute TransferConference HoldUser Preferences Setting User PreferencesDefault setting To unlock the keypad NavigateLock Keys Ring OptionsTelephone Ring Key Tones Noise ModePhone Options Auxiliary Ring 1System Information ExtensionKeypad Autolock To select the volume level Push to TalkPush to Talk Overview To initiate subsequent transmissions Using Push to Talk PTTTo change the PTT volume To initiate a callTo make a PBX call during a PTT call To mute a PTT callTo terminate incoming broadcasts To answer an incoming PBX call during a PTT callBattery Packs Important Information on your Battery Packs and ChargersBattery Pack Removal and Replacement Phone in DCE100 Desktop Charger Low Battery IndicationChargers Desktop ChargersDual Chargers To charge your phone with a desktop chargerPhone in DCE200 Dual Charger To charge your phone with a dual charger Indicator LightQuad Chargers To remove, charge and replace the 3620 battery packCleaning your Phone and Chargers General CareGeneral Care of your Phone and Chargers Declaration of Conformity Regulatory InformationOperational Warnings Radio Frequency InformationUse While Driving Electromagnetic Interference/CompatibilityFacilities Medical DevicesZ233 International CertificationsSpecific Absorption Rate Information Index CleaningAL7 1LZ