Avaya 3600 manual Important Information on your Battery Packs and Chargers

Battery Packs

Battery Packs

Important Information on your Battery Packs and Chargers

Chargers operate in a 50° - 85° F (10° to 30° C) environment. Do not expose them to freezing temperatures or direct sunlight.

Do not place anything in the charger other than your phone, you might damage the contacts. Bent contacts can keep the phone from charging.

It is normal for the battery pack to become warm when charging.

Only use Avaya battery packs with Avaya chargers. Never use non-Avaya chargers as they could damage the battery pack.

Only use the original plug-in power adapter for the chargers.

Do not dip the battery pack in the water or throw into fire.

Do not throw away the battery pack with your domestic waste. Take used battery packs to an appropriate collection point for recycling or send them back to your supplier or servicing agent.

Note

Replacement battery packs are available from your supplier or servicing agent.

Battery Pack Removal and Replacement

To remove and replace the 3616 and 3620 battery pack:

To remove: Press down on the latch on the battery pack on the back of the phone. The battery pack releases outward.

To replace: Slide the lip of the battery pack into the bottom of the cavity and push the top of the battery pack until is snaps into place. You should not have to force it against the phone.

To remove and replace the 3626 battery pack:

To remove: Hold the phone in one hand with the keypad facing up and press both battery pack release buttons (on the left and right side of the phone) at the same time. The battery pack releases downward and you can catch it with the palm of your hand.

If the battery pack does not release, gently shake the handset while pressing both release buttons. Do not pry.

To replace: Slide the battery pack straight into the cavity until it snaps into place. You should not have to force it against the phone.

Note

If you are using the telephony gateway on your phone system, the battery pack can be changed while the call is still in progress.

To change the battery pack while on a call:

1.Quickly remove the discharged battery pack but do not press End Call on your phone.

2.Replace with a charged battery pack and then press Power On to turn the phone back on.

3.To resume the call in progress, press Start.

Note

Battery packs are not interchangeable. The 3626 phone uses the BPX100 battery pack. The

3616 phone uses the BPE100 battery pack (Black) and the 3620 phone uses the BPN100 battery pack (Blue).

3600 Series Wireless User Guide	Page 24
IP Office	[15-601104] Issue [1] (1 June 2006)