Avaya 3600 manual Push to Talk Overview, To select the volume level

Page 25

User Preferences

Push to Talk

Push to Talk Overview

Note

The Push-to-Talk (PTT) option is available on the 3626 phone only.

The PTT feature enables your 3626 phone to operate in PTT broadcast mode in addition to the standard phone operation.

The 3626 phone supports eight multicast channels with the current channel saved in the memory of your phone. To initiate a PTT call, press the PTT button on the right side of your phone. All 3626 phones that are monitoring that channel will hear the transmission.

The PTT dialogue is interrupted when you answer a PBX call. When the PBX call is ended, PTT dialogue resumes (if on an active call).

PTT functionality for the 3626 phone, can be allowed or disallowed using the Admin menu. If allowed, you can enable or disable locally, set the channel, tone and audio volume. If disallowed, the menu for PTT does not appear on the Admin menu or if no channel is enabled on the Admin menu.

Channel

You can enable any PTT channel that has been allowed in the Admin menu by entering the corresponding number from the keypad. If PTT has been enabled on the phone, the default channel is the lowest allowed channel as set in the Admin menu.

Enable/Disable

Enable turns on PTT mode and disable turns it off. PTT is disabled by default.

Note

If PTT is allowed in the Admin menu and is enabled on your phone, standby battery pack life is decreased to approximately 30 hours.

Audio/Tone Volume

Used to adjust the audio and tone volume of PTT. The graduated volume bar indicates the levels.

The Audio volume setting may be overridden by adjusting volume while you are on a PTT call.

To select the volume level:

Press Up or Down (on the left side of your phone) and then press OK.

Additional options may be present. Contact your system administrator for information.

3600 Series Wireless User Guide

Page 21

IP Office

[15-601104] Issue [1] (1 June 2006)

Page 24 Page 26
Image 25
Page 24 Page 26
Contents IP Office Table Of Contents Iii Table Of ContentsPage Copyright Series Wireless User Guide IP Office Issue 1 1 JuneAbout this Guide Wireless PhoneOverview Important Information about your Phone3616/3620 Wireless Phone Power Off/End Call Power On/Start CallBattery Select3626 Wireless Phone Push-to-Talk Radio Control Modes of Operation Active ModeModes of Operation To make a call Press Start CallStandby Mode Push-to-Talk ModeTurning the Phone On/Off Basic OperationAnswering Calls Making Calls System Feature ActivationLocking/Unlocking your Phone To change the speaker volume whilst on a call Volume SettingsVoicemail To silence your ringing phoneConf Using the SoftkeysHold MuteConference TransferHold MuteUser Preferences Setting User PreferencesDefault setting Lock Keys NavigateRing Options To unlock the keypadTelephone Ring Phone Options Noise ModeAuxiliary Ring 1 Key TonesExtension System InformationKeypad Autolock Push to Talk To select the volume levelPush to Talk Overview To change the PTT volume Using Push to Talk PTTTo initiate a call To initiate subsequent transmissionsTo terminate incoming broadcasts To mute a PTT callTo answer an incoming PBX call during a PTT call To make a PBX call during a PTT callImportant Information on your Battery Packs and Chargers Battery PacksBattery Pack Removal and Replacement Chargers Low Battery IndicationDesktop Chargers Phone in DCE100 Desktop ChargerTo charge your phone with a desktop charger Dual ChargersPhone in DCE200 Dual Charger To charge your phone with a dual charger Indicator LightQuad Chargers To remove, charge and replace the 3620 battery packGeneral Care Cleaning your Phone and ChargersGeneral Care of your Phone and Chargers Declaration of Conformity Regulatory InformationOperational Warnings Radio Frequency InformationFacilities Electromagnetic Interference/CompatibilityMedical Devices Use While DrivingZ233 International CertificationsSpecific Absorption Rate Information Index CleaningAL7 1LZ
Top Page Image Contents