Avaya 3600 manual Phone Options, Auxiliary Ring 1, Noise Mode, Key Tones, Display Contrast

Page 23

User Preferences

Auxiliary Ring 1 and 2

The Auxiliary Ring 1 and 2 options are designed to be utilized by OAI applications, enabling you to set a distinctive ring for these applications. Select the desired Auxiliary Ring.

Phone Options

The phone options allow you to set the phone for five separate functions; Noise Mode, Key and Warning Tones, Display Contrast and Keypad Autolock.

Noise Mode

The Noise Mode option enables you to adjust your phone to account for the noise level in your environment. Select from:

Normal: For most office environments.

High: For moderate background noise.

Severe: For extremely noisy conditions.

Note

Unless you are in a loud environment, using High and Severe Noise Modes is not recommended as you may find it difficult to be heard on your phone.

Key Tones

When you press the keypad, Key Tones are played. Key Tones are enabled by default and can be disabled, if required.

Warning Tones

Warning tones are played to alert you to various conditions, such as out of range, system up or down etc. Warning Tones are enabled by default and can be disabled, if required.

Display Contrast

You can adjust the display for different lighting conditions.

To set the contrast , press Up or Down (on the left side of your phone) until the desired contrast is displayed and then press OK. The minimum value is 30 and the maximum value is 83.

3600 Series Wireless User Guide	Page 19
IP Office	[15-601104] Issue [1] (1 June 2006)

Image 23

Contents IP Office Table Of Contents Iii Table Of ContentsPage Copyright Series Wireless User Guide IP Office Issue 1 1 JuneAbout this Guide Wireless PhoneOverview Important Information about your Phone3616/3620 Wireless Phone Select Power On/Start CallPower Off/End Call Battery3626 Wireless Phone Push-to-Talk Radio Control To make a call Press Start Call Active ModeModes of Operation Modes of OperationStandby Mode Push-to-Talk ModeAnswering Calls Basic OperationTurning the Phone On/Off Locking/Unlocking your Phone System Feature ActivationMaking Calls To silence your ringing phone Volume SettingsTo change the speaker volume whilst on a call VoicemailMute Using the SoftkeysConf HoldMute TransferConference HoldUser Preferences Setting User Preferences Default setting To unlock the keypad NavigateLock Keys Ring OptionsTelephone Ring Key Tones Noise ModePhone Options Auxiliary Ring 1Keypad Autolock System InformationExtension Push to Talk Overview To select the volume levelPush to Talk To initiate subsequent transmissions Using Push to Talk PTTTo change the PTT volume To initiate a callTo make a PBX call during a PTT call To mute a PTT callTo terminate incoming broadcasts To answer an incoming PBX call during a PTT callBattery Pack Removal and Replacement Battery PacksImportant Information on your Battery Packs and Chargers Phone in DCE100 Desktop Charger Low Battery IndicationChargers Desktop ChargersPhone in DCE200 Dual Charger Dual ChargersTo charge your phone with a desktop charger To charge your phone with a dual charger Indicator LightQuad Chargers To remove, charge and replace the 3620 battery packGeneral Care of your Phone and Chargers Cleaning your Phone and ChargersGeneral Care Declaration of Conformity Regulatory InformationOperational Warnings Radio Frequency InformationUse While Driving Electromagnetic Interference/CompatibilityFacilities Medical DevicesZ233 International CertificationsSpecific Absorption Rate Information Index CleaningAL7 1LZ