User Preferences
To mute a PTT call:
Mute only affects the current call and the phone will play subsequent PTT calls. Mute does not allow you to use the phone's keypad for anything else, including an OAI application.
1.To mute a current call, press Mute.
2.The prompt Mute
3.While in the mute state, Mute turns into UnMute on the display and you can choose to unmute the PTT call (the confirmation prompt is displayed first). When the next PTT call period starts, the audio is automatically unmuted.
To terminate incoming broadcasts:
Press Terminate and at the confirmation prompt, press Yes. PTT is immediately stopped and the phone exits the PTT session. Only the current call is terminated from the phone, no other phone is affected.
When the next PTT call period starts, the phone is again in the receive state. You can rejoin an active session by initiating a PTT call.
Note
If you do not wish to receive any further PTT calls, it is advisable to disable the PTT feature in the
A phone call can be answered while in a PTT call session. To announce an incoming call, the phone will ring with a
To answer an incoming PBX call during a PTT call:
1.Press 
Start Call. The PTT call session will be
If you do not press 
Start Call to answer the phone call, the PTT display will be shown after the ring has stopped.
2.To go back 
End Call. The PTT goes out of pre- empted mode and becomes active again. If an active PTT call has not ended, the PTT audio starts playing again.
To make a PBX call during a PTT call:
To start a call during a PTT session, press 
Start Call. This causes the
Receiving an incoming PTT call during a PBX call:
If a PTT session is started during a PBX call, the PTT 'receiving alert'sound will play softly in the speaker audio. You can continue your PBX call normally. To switch to the PTT call by ending the PBX call, press 
End Call.
3600 Series Wireless User Guide | Page 23 |
IP Office |