On-Air 2000 Executive ~ 3rd Edition ~ 2nd August ’02 ~ 4744
On the handset:-
▲Use the UP button to scroll to Base.
Press the OK button to confirm.
The display will show Register.
Press the OK button to confirm.
▲Use the UP or DOWN button to scroll to
▼Custom.
Press the OK button to confirm.
▲Use the UP or DOWN button to scroll to
▼the required base number.
Press the OK button to confirm.
At this stage if you require you can edit the base name.
Press the OK button to confirm.
Enter the System Code using the keypad. Press the OK button to confirm.
The display will now flash Searching for base.
You will then see a list of the available handset numbers.
▲Use the UP or DOWN button to scroll to
▼the number you require.
C OK | Press the OK button to confirm. | ||||
| After a few seconds the handset will be | ||||
| registered and display: | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Base 1
Handset 2
C
OK C can also be pressed to return to idle.
Note
The number you save becomes the handset’s name (ie. ‘Handset 2’).
To
▲Press the UP button to scroll to the Base menu.
C | OK | Press the OK button to confirm. |
▲Use the UP or DOWN button to scroll to
▼Base settings.
C | OK | Press the OK button to confirm. |
▼Use the DOWN button to scroll to Handsets.
C | OK | Press the OK button to confirm. |
▼Use the DOWN button to scroll to
C | OK | Press the OK button to confirm. |
Enter the System Code.
C
OK Press the OK button to confirm.
▲Use the UP or DOWN button to scroll to the ▼ handset that you want to
C | OK | Press the OK button to confirm. |
This will time out and go back to idle.
Or
C OK | Press the C button until you get back to idle. |
The handset is now
Note
When planning to use a handset with more than one base, we recommend that you:
•Give a number to each base (from
•Number each handset (from
•Register your handset(s) at base 2 (and 3 & 4 if used) using the same internal number as at base 1.
9