On-Air 2000 Executive ~ 3rd Edition ~ 2nd August ’02 ~ 4744
Using the BT On-Air 2000 Executive handset
To switch the handset power on and off
Press and hold the GREEN PHONE button until after the display check sequence has happened and only the battery icon is displayed.
If you release the button before this has happened, the handset will remain switched off.
Press and hold the RED PHONE button to switch the handset off.
To end a call
Press the RED PHONE button.
To receive a call
Press the GREEN PHONE button to answer the call.
Making and ending calls
To make an external call
Press the GREEN PHONE button.
The display shows the 
symbol.
Dial the number.
Preparatory dialling
First enter the number to be dialled.
The number is shown in the display. (If you make a mistake press C to remove the incorrect digit).
If you have entered the number correctly, press the GREEN PHONE button to dial the number.
Call timer
Your handset will automatically time the duration of all external calls. The handset display shows the call duration both during your call and for one second after it is complete.
To adjust the earpiece volume
You can adjust the volume during a call and whilst using the phone on handsfree.
Press the 
button to increase the volume.
Press the 
button to decrease the volume.
The display shows the current volume level.
Note
The 
symbol on your handset display indicates when you are in range of the base station. If the symbol disappears you are out of range and will need to move closer to the base station.
Please note that this product does not have autotalk standby. To end a call you must press the RED PHONE button, you cannot just replace the handset on the base station.
12