BT 2000 Executive manual Registering your handset, Using additional handsets and bases

Page 9

On-Air 2000 Executive ~ 3rd Edition ~ 2nd August ’02 ~ 4744

Registering your handset

Using additional handsets and bases

Up to six handsets can be registered and operated from any one base (on fax machines up to four handsets can be registered). This allows you to make internal calls between two handsets while a third is making an external call. Each handset can also be registered on up to four bases.

▲

COK

COK

At the base:-

Press and hold down the PAGE button on the base until it starts to flash.

On the handset:-

Use the UP button to scroll to Base.

Press the OK button to confirm.

The display will show Register.

Press the OK button to confirm.

Each additional handset you purchase must be registered to a base.

If you are registering to a BT On-Air 1300, 1250, 2250 or 2300 base you will need to press the

 Skip button instead of the button on the base.

▲Use the UP or DOWN button to scroll to

▼Automatic.

C

OK

Press the OK button to confirm.

The display will show Searching for base.

After a few seconds the handset will be registered and display:

To register your BT On-Air 2000 Executive handset to a base station (if you have not changed the System Code from 0000)

Note

Please note that when you register a handset in the following way any previous base that the handset has been registered to will be deleted. To prevent the deletion of other registered bases please register using the process opposite “To register your BT On-Air 2000 Executive handset to a base station (if you have changed the system code from 0000).” even if you have not changed the system code from 0000.

If you have registered your handset to more than one base you can prioritise which base you want your handset to use. For instructions on base station priority, see your main On-Air user guide.

Base 1

Handset 2

To register your BT On-Air 2000 Executive handset to a base station (if you have changed the System Code from 0000)

At the base:-

Press and hold down the PAGE button on the base until it starts to flash.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents On-Air 2000 Executive ~ 3rd Edition ~ 2nd August ’02 ~ At a glance General information Index This guideMenu Structure Answer machine Introduction Safety informationUnpacking your BT On-Air 2000 Executive Handset & Charger For your recordsBattery low warning Setting upBattery performance Plan the locationChanging your handset fascias To replace the handset batteryAttach the belt clip HelplineRegistering your handset Using additional handsets and basesNumber you save becomes the handset’s name ie. ‘Handset 2’ Press OK To register your handset to a BT On-Air DECTfax PlusOn-Air 2000 Executive ~ 3rd Edition ~ 2nd August ’02 ~ Using the BT On-Air 2000 Executive handset Call timerMaking and ending calls To switch secrecy on/off To insert a pause when storing a number in the directorySecrecy To use handsfreeTo edit and delete directory numbers Internal callsTo dial a number from the directory To make an internal call to another handsetCalls list Caller DisplayTo transfer an external call between handsets Quick guide to Calls list menu structureTo enter the redial list All callsTo delete, copy or dial numbers in the calls or redial list To enter the all calls listTo adjust ringer melody and volume Silent mode Handset settingsKeypad beeps and tones To delete a number or delete all numbersTo use your handset when the keyguard is on To switch keyguard onTo switch keyguard off KeyguardAlarm clock Economy mode To set the alarmTo turn the alarm off Timer To change the welcome screen AnswerProgram buttons Guarantee General informationTechnical information Switchboard external line access code Index
Top Page Image Contents