5995 BT Paragon 450 UG [5] 2/11/04 4:36 pm Page 30
BT Paragon 450 – Edition 05 – 02.11.04 – 5995
30 Answering machine
You can pause playback for up to 60 seconds. If playback is not resumed, your BT Paragon 450 will return to standby.
Message playback
You can play messages whether the answering machine is switched on or off.
You can listen to messages over the loudspeaker. Lift the handset to hear them on the handset or press Headset to hear them on a headset.
New messages are played first. As soon as they have been played back, they are stored as old messages.
If there are no messages, the prompt announces “You have no messages”.
1.Press PausePlay . The time the message was received is displayed. During playback:
Press ◀ twice to play the previous message. Press ▶ to play the next message.
Press Delete to delete the message.
Press Volume then ◀ or ▶ to adjust the volume.
Press PausePlay to pause playback, press PausePlay again to resume.
Delete all old messages
1.During standby, press Delete . The display shows DELETE ALL? Press Delete again. The display shows MESSAGE DELETED.
Memory full
When the recording memory is full, your BT Paragon 450 automatically switches to Answer Only and the display will show ANSWER ONLY. You must delete stored messages before you can take new ones.
If the memory becomes full during a call, the caller will hear the announcement “Memory full, thank you for calling” and the answering machine will hang up.