BT PARAGON450 manual General information Switchboard external line access code

5995 BT Paragon 450 UG [5] 2/11/04 4:36 pm Page 41

BT Paragon 450 – Edition 05 – 02.11.04 – 5995

General information 41

Switchboard external line access code

You may need to enter an access code (e.g. 9) in order to get an outside line. So that the switchboard has time to pick up an outside line, you may also need to add a Pause after the access code.

You can enter an access code followed by a pause as part of any number stored in the Directory or the Memory 1 - Memory 3 one-touch buttons.

1.To enter a Pause, press . The display indicates a Pause as P in the

stored number. If you need a longer pause, press twice.

Recall (R)

is used when connected to certain switchboards (PBXs) and some BT Calling Features, or those services available via your network provider.

Dialling mode

Your BT Paragon 450 is set to Tone dialling. With some older switchboards/PBXs you may need to change the dialling mode to Pulse.

1. Switch the button on the underside of the base from T to P.