AT&T TL-210 WH user manual Speed Dialing, Memory Erase

Speed Dialing

Ten telephone numbers can be stored in standard speed-dialing locations. You can dial any of these numbers by pressing two buttons.

To program numbers into memory

1Lift the handset.

2Press PROG/MUTE .

3Press MEM .

4Enter a digit (0-9) for the memory location where the number is to be stored.

5Enter telephone number. You will hear a click when each button is pressed.

6Press PROG/MUTE .

7Hang up after the number is entered correctly.

8Repeat Steps 1–7to store another number.

To dial

1Listen for dial tone.

2Press MEM .

3Press memory location (0-9).

Memory Erase

To erase any number from memory, you can enter another number in the same location.

9