AT&T TL-210 WH user manual Temporary Tone Dialing

Page 7

Temporary Tone Dialing

Temporary tone dialing is used only when you have rotary service. It allows you access to services that require tone signaling, including some tone-activated computer systems (e.g., telephone banking).

To change from pulse (rotary) to tone dialing during a call:

1Dial a telephone number with the DIAL switch set to DP (pulse).

2Press t; all buttons pressed after this will send tone signals.

3After you hang up, the phone automatically returns to rotary service.

Image 7

Contents Trimline Connect handset to base TABLE/DESK InstallationCheck for dial tone Fill in directory card Wall InstallationReverse handset tab Connect handset to telephone Install telephone base on wall jack Hold the base upFlash OperationRedial Erasing RedialSelect Ringer Tone Ringer VolumeReceiver Handset Volume MuteTemporary Tone Dialing Memory Dialing Memory FeaturesTo program numbers into memory One-Touch DialingTo dial Memory Erase Speed DialingNo Dial Tone Case of DifficultyTelephone Does Not Ring