AT&T TL-210 WH user manual Operation, Erasing Redial, Flash

Page 5

OPERATION

Redial

This telephone stores in memory the last phone number dialed. However, if the phone is unplugged from the line jack for 30 minutes or more, redial memory will be lost.

The redial memory can accept numbers up to 31 digits long. The number will remain in memory until you change it by dialing another telephone number.

To dial the same number again, lift the handset, and press REDIAL .

NOTE: If the number is more than 31 digits long, no digits will be stored in the redial memory.

Erasing Redial

For privacy, you can erase the redial memory. Lift the handset, then press 1 and hang up.

Flash

Press FLASH instead of pressing the switchhook to activate custom calling services such as call waiting or 3-way calling.

You may have to press other buttons before or after FLASH as explained in custom calling instructions provided by your local telephone company.

4

Image 5
Contents Trimline Check for dial tone TABLE/DESK InstallationConnect handset to base Reverse handset tab Wall InstallationFill in directory card Connect handset to telephone Install telephone base on wall jack Hold the base upRedial OperationErasing Redial FlashReceiver Handset Volume Ringer VolumeMute Select Ringer ToneTemporary Tone Dialing Memory Dialing Memory FeaturesTo dial One-Touch DialingTo program numbers into memory Memory Erase Speed DialingNo Dial Tone Case of DifficultyTelephone Does Not Ring