AT&T TL-210 WH user manual One-Touch Dialing, To program numbers into memory, To dial

Page 9

One-Touch Dialing

Three numbers can be stored in one-touch memory locations . You can dial these numbers by pressing one of the buttons marked with an emergency symbol

(, or ).

To program numbers into memory

1 Lift the handset.

2Press

PROG/MUTE .

3 Press the

one-touch memory

button

where the number is to be stored.

4Enter telephone number. You will hear a click when each button is pressed.

5Press PROG/MUTE

6Hang up after the number is entered correctly.

7Repeat Steps 1–6to store another number.

To dial

1Listen for dial tone.

2Press the one-touch memory button

( , or ).

8

Image 9
Contents Trimline TABLE/DESK Installation Connect handset to baseCheck for dial tone Wall Installation Fill in directory cardReverse handset tab Connect handset to telephone Install telephone base on wall jack Hold the base upRedial OperationErasing Redial FlashReceiver Handset Volume Ringer VolumeMute Select Ringer ToneTemporary Tone Dialing Memory Dialing Memory FeaturesOne-Touch Dialing To program numbers into memoryTo dial Memory Erase Speed DialingNo Dial Tone Case of DifficultyTelephone Does Not Ring