AT&T 915 user manual Telephone memory, Directory card, Store a number in memory

Page 14

Telephone memory

This telephone can store 13 telephone numbers, each up to 16 digits long. You can dial numbers stored in memory by pressing one or two buttons.

Directory card

Lift the plastic cover off the directory card to write the numbers (or names) stored in telephone memory on the card. Then replace the cover.

Store a number in memory

1. Lift the handset.

2. Press and release PROG.

3. Dial the telephone number (up to 16 digits).

4. Press and release PROG.

5. Press the memory location where

you want to store the number

( , or for one-touch dialing, or 0 - 9 for two-touch dialing).

6.Replace the handset.

NOTE: With the handset lifted, you have limited time to store a number. If you take too much time, you may hear a recorded message from your phone company.

Telephone memory

11

Image 14
Contents Big button telephone Or call 1 800 Contents Before you begin Parts listBefore you begin Table/desk installation InstallationInstallation Connect the handset to the telephone Check for dial tone Wall installation Reverse the handset tab Connect the handset to the telephone Make a call Telephone operationTelephone operation End a callRedial FlashTemporary tone dialing Handset volumeRinger volume Directory card Telephone memoryTelephone memory Store a number in memoryDial a number in two-touch memory Store a pause in a memory numberDial a number in one-touch memory Erase a memory numberGeneral product care General product careTechnical specifications Technical specificationsNo dial tone Case of difficultyCase of difficulty Telephone doesProblem Solution ProblemIndex Index