Telephone memory
Store a pause in a memory number
Press and release REDIAL/PAUSE once to store a three to four second pause in the dialing sequence. Each additional press will add another three to four second pause.
NOTE: Each three to four second pause counts as one digit when storing numbers in telephone memory.
Dial a number in one-touch memory
To dial a number stored in memory locations 
, 
or 
:
1.Lift the handset and wait for a dial tone.
2.Press the memory button ( 
,
or 
) where the number is stored. The number is dialed automatically.
Dial a number in two-touch memory
To dial a number stored in a
1.Lift the handset and wait for a dial tone.
2.Press and release MEM, then press the memory button ( 0 - 9 ) where the number is stored. The number is dialed automatically.
Erase a memory number
To erase a memory location, store a different telephone number in the same location.
12