Ultratec Miniprint 425 manual Signal light and display, Dialing tips

Signal light and display

The signal light and display show what is happening on the telephone line in the following ways:

•Signal light steadily on: dial tone.

•Signal light flashing slowly or RINGING on display: telephone ringing.

•Signal light flashing quickly or BUSY on display: telephone busy.

•Signal light flickering: person picking up telephone or speaking.

Dialing tips

You may need to type a 9 or other number to reach an outside line if you are using the Miniprint 425 in an office.

Use a comma to put in a two-second pause.

For long distance, include a 1 and the area code.

Use a ! for a hook flash.A hook flash is used in a voice mail system or to transfer a call.

You cannot use * and # with pulse dialing.

Using a telephone to dial

If you have a telephone connected with your Miniprint 425, you can dial the number on the telephone. Follow these steps to use a telephone to dial a number:

1.Pick up the handset and dial the number on the telephone.

2.Turn on the Miniprint 425.

3. Press any key to go on-line.

4.Hang up the telephone handset.

5.Wait for a response.

C A L L I N G • 1 5