Ultratec Miniprint 425 manual Sticky Keys

Page 38

STICKY KEYS

Ordinarily, when you use the Ctrl or Shift keys, you must hold down either key while you press another key. If you have trouble pressing two keys at once, the sticky keys feature lets you use the Ctrl and Shift keys by pressing one key at a time.

To turn on sticky keys, press either Shift key five times.The display says STICKY KEYS ON.

Now you can type a $ by pressing and releasing the		Shift	key,
then pressing and releasing the 4 key.
When sticky keys is on, you can also lock down the			key
When sticky keys is on, you can also lock down the		Ctrl	key

or a Shift key so that it affects every other key until you unlock it.To lock the Ctrl key or a Shift key, press the key twice.To unlock the key, press it once more.

Press either Shift key five more times to turn off sticky keys. The display says STICKY KEYS OFF.

If you use sticky keys all the time, you do not have to turn it on each time you turn on the Miniprint 425.After you turn on the sticky keys feature, it stays on until you turn it off or reset the machine.

3 6 • S T I C K Y K E Y S

Image 38

Contents Using Your Miniprint Acknowledgement Ultratec, Inc Science Drive Madison, WIContents Sticky keys Specifications Index Conversation Etiquette Important safety instructions General safetyBattery safety Introduction Dial keyOverview of the Miniprint Special keys1SETUP Plugging in power and the telephone line Charging the batteries Setting pulse or tone dialingConnecting a signaler or telephone What kind of telephone line?About Auto ID About the printerSetting the print case Setting the print sizeE T U P 2CALLING Making a call in direct connect Signal light and display Dialing tipsAnswering a call in direct connect Acoustic calling and answering Using Turbo Code interrupt About Turbo CodeWait for response Change to other TTYThree-way calling Type NAME, NUM, or CRTransferring a call A L L I N G 3AUTO-ANSWER Interrupting auto-answer Setting the number of telephone ringsTurning on auto-answer 4OPTIONS Setting the print caseSetting the print size Turning off Turbo Code Setting pulse/tone dialingSetting the number of auto-answer rings Turning off Auto ID Turning off interruptSetting the Baudot code baud rate 5CARE & Repair Replacing the printer paper Exercising the batteries About the batteriesChecking the batteries Replacing the batteries Poor reception TroubleshootingDirect connect Power PrinterCalling for help Resetting the MiniprintRepair Sending in the Miniprint 425 for repairSticky Keys Specifications PowerFCC information Technician for helpIndustry Canada information Index Auto-answerD E X 4 Conversation Etiquette GA or SK