Ultratec Miniprint 425 manual 4OPTIONS, Setting the print case, Setting the print size

Page 27

C H A P T E R

4OPTIONS

This chapter describes all of the settings you can change with the options key.They are listed in the order they appear on the display when you press the options key ( Ctrl + 3 ) and

then the	Return	key. Use the	Spacebar		to show the different
settings for each option. Use the						key to select a setting.
				Return

Setting the print case

Follow these steps to print in all uppercase letters:

1.Press the options key ( Ctrl + 3 ).You will see PRINT (UP/LOW) CASE on the display.

2.Press the

Spacebar

to change the option.

3.Press the Esc key to save the new setting and leave options or press the Return key to save and go to the next option.

Setting the print size

Follow these steps to print either 14 or 19 characters on a line instead of 24 characters:

1.Press the options key ( Ctrl + 3 ).You will see PRINT (UP/LOW) CASE on the display.

2.Press the Return key until you see PRINT SIZE (NORMAL).

3. Press the Spacebar to change the setting to BOLD or WIDE.

4.Press the Esc key to save the new setting and leave options or press the Return key to save and go to the next option.

O P T I O N S • 2 5

Image 27

Contents Using Your Miniprint Ultratec, Inc Science Drive Madison, WI AcknowledgementContents Sticky keys Specifications Index Conversation Etiquette General safety Important safety instructionsBattery safety Dial key IntroductionSpecial keys Overview of the Miniprint1SETUP Plugging in power and the telephone line What kind of telephone line? Setting pulse or tone dialingConnecting a signaler or telephone Charging the batteriesAbout the printer About Auto IDSetting the print size Setting the print caseE T U P 2CALLING Making a call in direct connect Dialing tips Signal light and displayAnswering a call in direct connect Acoustic calling and answering About Turbo Code Using Turbo Code interruptChange to other TTY Wait for responseType NAME, NUM, or CR Three-way callingTransferring a call A L L I N G 3AUTO-ANSWER Setting the number of telephone rings Turning on auto-answerInterrupting auto-answer Setting the print case Setting the print size4OPTIONS Setting pulse/tone dialing Setting the number of auto-answer ringsTurning off Turbo Code Turning off interrupt Turning off Auto IDSetting the Baudot code baud rate 5CARE & Repair Replacing the printer paper About the batteries Checking the batteriesExercising the batteries Replacing the batteries Troubleshooting Direct connectPoor reception Printer PowerSending in the Miniprint 425 for repair Resetting the MiniprintRepair Calling for helpSticky Keys Power SpecificationsTechnician for help FCC informationIndustry Canada information Auto-answer IndexD E X 4 GA or SK Conversation Etiquette