IP Phone Release Notes 2.3
New Features in Release 2.3
Configuring LLDP-MED Using the Aastra Web UI
Use the following procedure to configure
Aastra Web UI
1
Click on Advanced
LLDP
LLDP Packet Interval
2 | The “LLDP” field is enabled by default. To disable LLDP, click the check mark in the box to clear the check mark. | |
3 | In the “LLDP Packet Interval” field, enter the time, in seconds, between the transmission of LLDP Data Unit | |
| (LLDPDU) packets. |
|
| The value of zero (0) disables this parameter. Valid values are 0 to 2147483647. Default is 30. | |
|
|
|
4 | Click | to save your changes. |
10 |