IP Phone Release Notes 2.3
New Features in Release 2.3
Ignore Out of Sequence Errors
In Release 2.3, an Administrator can configure the phone via the “sip accept out of order requests” parameter to ignore CSeq number errors on all SIP dialogs on the phone. When this parameter is enabled, the phone no longer verifies that the sequence numbers increase for each message within a dialog, and does not report a "CSeq Out of Order" error if they do not increase.
Note: As the default Asterisk configuration does not fully track dialogs through a reboot, it is recommended that this parameter be enabled when using the BLF feature with an Asterisk server. If you do not enable this feature, then rebooting the Asterisk server may cause BLF to stop working. With this parameter enabled, the BLF key starts working again when the phone
Enabling/Disabling “Out of Order SIP Requests”
Use the following parameter to enable or disable the SIP out of order requests.BL
Parameter– | Configuration Files | aastra.cfg, <mac>.cfg | |
sip accept out of order |
|
|
|
requests |
|
|
|
|
| ||
Description | Enables a workaround for | ||
| which do not increment the CSeq numbers in SIP requests sent to the | ||
| phone. |
| |
|
|
| |
Format | Boolean |
| |
|
|
|
|
Default Value | 0 | (disabled) |
|
|
|
|
|
Range | 0 | (disabled) |
|
| 1 | (enabled) |
|
|
| ||
Example | sip accept out of order requests: 1 | ||
|
|
|
|
58 |