Aastra Telecom CT9143i manual Configuring Preferred Line Focus via the Aastra Web UI

SIP IP Phone Models 9143i, 9480i, 9480i CT and 5i Series Phones Release Note 2.3

New Features in Release 2.3

Configuring Preferred Line Focus via the Aastra Web UI

Use the following parameters to configure preferred line focus using the Aastra Web UI.

Aastra Web UI

1Click on Basic Settings->Preferences->General.

Preferred Line

Preferred Line

Timeout

2	In the “Preferred Line” field, select a preferred line to switch focus to after incoming or outgoing calls end on the
	phone. Valid values are:
	• None (disables the preferred line focus feature)
	•	1 to 9
	Default is 1.
	For example, if you set the preferred line to “1”, when a call (incoming or outgoing) ends on the phone (on any line),
	the phone switches focus back to Line 1.
3	In the “Preferred Line Timeout” field, enter the amount of time, in seconds, that the phone switches back to the
	preferred line after a call (incoming or outgoing) ends on the phone, or after a duration of inactivity on an active
	line. Default is 0. Valid values are:
	•	0 to 999
4	Click		to save your changes.

RN-001029-02, Release 2.3, Rev 00 51