IP Phone Release Notes 2.3
New Features in Release 2.3
Examples
The following are examples of using the “mix” and “disableIcon” execute commands with the AastraIPPhoneExecute object. These commands apply to both the RTP and multicast RTP XML commands (RTPTx, RTPRx, RTPMTx, RTPMRx).
•Send mix unicast RTP stream (if there is existing voice call) to 10.30.100.20:21000. Mix icon is displayed on the phone’s call screen.
<AastraIPPhoneExecute>
<ExecuteItem URI="RTPTx:10.30.100.20:21000:mix"> </AastraIPPhoneExecute>
•Receive unicast RTP stream from 10.30.100.20 at port 21000 with the egress voice settings at 3 levels more than the current offset and play on top of the existing voice stream (if any).
<AastraIPPhoneExecute>
<ExecuteItem URI="RTPRx:10.30.100.20:21000:3:mix"> </AastraIPPhoneExecute>
•Receive unicast RTP stream from 10.30.100.20 at port 21000 with the voice settings as used earlier and play on top of the existing voice call (if any). Also, the mixing icon is not shown on the call screen.
<AastraIPPhoneExecute>
<ExecuteItem URI="RTPRx:10.30.100.20:21000:mix:disableIcon"> </AastraIPPhoneExecute>
Dialpad Passthrough for Objects
In previous releases, when an XML application was active on the phone, it suppressed all dialpad events. This suppression was to prevent digit events from being sent to the underlying line application.
On the IP Phones, an XML Developer can now control digit passthrough while the phone is in the connected state. (This feature is only applicable to phones in the connected state). This can be done by setting the new “allowDTMF” attribute with the XML objects AastraIPPhoneTextScreen, AastraIPPhoneFormattedTextScreen, and AastraIPPhoneImageScreen. Setting this attribute to “yes” allows dialpad events to pass through the XML applications.
Note: The default behavior for this feature is to suppress dialpad events when an XML object is in focus (same as in previous releases). Other XML objects ignore this attribute.
34 |