IP Phone Release Notes 2.3
New Features in Release 2.3
Configuring the Action URI Disconnect Feature Using the Aastra Web UI
Use the following procedure to configure the Action URI Disconnect feature.
Aastra Web UI
1Click on Advanced Settings->Action URI->Event.
2 | In the “Disconnected” field, enter a valid URI for which the phone executes a GET on, when it transitions from | |||||
| the incoming, outgoing, calling, or connected state into the idle state. Leaving this field empty disables the Action | |||||
| URI Disconnected feature. For example, |
|
| |||
| http://fargo.ana.aastra.com/disconnected.xml?state=$$LINESTATE$$ | |||||
| The following table lists the applicable values and descriptions for the $$LINESTATE$$. | |||||
|
|
|
|
|
|
|
|
| $$LINESTATE$$ Value |
| Description | Meaning in a Disconnected URI |
|
|
|
|
|
|
|
|
|
| IDLE |
| Phone is idle. | N/A |
|
|
|
|
|
|
|
|
|
| DIALING |
| Phone is offhook and ready to | N/A |
|
|
|
|
| dial. |
|
|
|
|
|
|
|
|
|
|
| CALLING |
| A SIP INVITE was sent but no | Error occurred during the call. |
|
|
|
|
| response was received. |
|
|
|
|
|
|
|
|
|
|
| OUTGOING |
| Remote party is ringing. | Call was cancelled. |
|
|
|
|
|
|
|
|
|
| INCOMING |
| Local phone is ringing. | Call was missed or cancelled. |
|
|
|
|
|
|
|
|
|
| CONNECTED |
| Parties are talking. | Call was successful. |
|
|
|
|
|
|
|
|
|
| CLEARING |
| Call was released but not | N/A |
|
|
|
|
| acknowledged. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 | Click | to save your settings. |
|
| ||
48 |