IRIS 200 installation manual Conformance

Page 20

Conformance

The IRIS range of alarm dialers comply with the following European Directives:

1999/5/EC (Radio & Telecoms Terminal Equipment Directive).

72/23/EEC (Low Voltage Directive).

89/336/EEC (Electromagnetic Compatibility Directive as amended by 92/31/EEC).

Conformance to EN50131 and EN50136

The IRIS dialers are compatible with the requirements of European standards prEN50131-1 (Alarm Systems – Intrusion and hold-up systems Part 1: System Requirements) (dated Feb 2004) and EN50136-1-1 (Alarm Systems – Alarm transmission systems and equipment) (January 1998 with Amendment 1 August

2001) as follows:

The IRIS dialers conform to Environmental Class II.

The IRIS dialers are compliant to ATS 6 compatible with Security Grade 4.

Safety

Care should be taken when interconnecting telecommunications equipment that only like interfaces are interconnected to avoid safety hazards.

SELV:

SELV (Safety Extra-Low Voltage) is defined as a secondary circuit

 

which is so designed and protected that under normal and single fault

 

conditions the voltage between any two accessible parts does not

 

exceed a safe value (42.4V peak or 60V dc maximum).

The interfaces on the IRIS dialer have the following safety classifications:

Dialer Interface: SELV suitable for connection to the TNV interface of a single line telecommunications equipment such as telephones, faxes, etc.

Data Interface: SELV suitable for connection to the SELV interface on a data terminal such as a PC COM port.

Power Interface: SELV for connection to a DC supply.

Inputs and Outputs: SELV for connection to alarm output and input pins.

Iris Touch 200 Range Dialer Installation Manual

15

Image 20
Contents Range Dialer Installation Manual Page Page Contents Ii Iris Touch 200 Range Dialer Installation Manual Overview IntroductionAbout this manual… System specifications GprsPre-requisites Package contentsBefore you start… Alarm dialer interface Installing the Iris Touch DialerDecide where to run the cables Fit the SIM card GSM / Ethernet & Gprs only Configuring the Iris Touch Dialer Post installation PIN alarmsInstallation Relay outputs TroubleshootingDefault alarm messages Appendix a Settings menu Setting PurposeAppendix B Installation photos Iris Touch 200 Range Dialer Installation Manual Appendix C Specification Alarm Dialer InterfaceConformance