Polycom 1500 D manual Configuring the Phones, Time and Date Display Browser Protocol

Page 13

Setting Up the Polycom VVX 1500 D Phone

The following figure shows how to connect the phone to the network.

1	2

3

To connect the Polycom VVX 1500 D phone to the network:

1. Clamp a ferrite clamp around the cable.

2. Connect the 25-foot Network Cable to the LAN jack on the phone.

3. Connect the other end of the 25-foot Network Cable to an available LAN port on the wall or hub/switch device port.

Note	AC power adapters are not included in the basic phone package. Using the
	supplied network cable, the phone can be powered from a Power over Ethernet
	(PoE) compliant switch or hub. Power over Ethernet is the default connection for
	the phone.

Configuring the Phones

Before you can allow users to place and answer calls you must make some basic configuration changes.

This section provides information for making configuration changes for:

•Time and Date Display

•Browser

•H.323 Protocol

To troubleshoot any problems with the Polycom VVX 1500 D phones on the network, refer to Troubleshooting the Polycom VVX 1500 D Phone on page 3-1.

2 - 3

Image 13

Contents SIP 3.2.2 November 2009 1725-16823-001 Rev. a Trademark Information About This Guide Deployment Guide for the Polycom VVX 1500 D Phone Contents Deployment Guide for the Polycom VVX 1500 D Phone Overview Supported Phone Features Unsupported Phone FeaturesUnsupported Phone Features Supported Phone FeaturesOverview Deployment Guide for the Polycom VVX 1500 D Phone Setting Up the Polycom VVX 1500 D Phone Refer to Upgrading the Phone’s Software on Connecting the Phone to the NetworkTime and Date Display Browser Protocol Configuring the PhonesBrowser Time and Date DisplayProtocol Make/Model Protocol Software Version Deployment Guide for the Polycom VVX 1500 D Phone Deploying Phones From the Provisioning Server on Modifying Phone’s Configuration Using the Web InterfaceDeployment Guide for the Polycom VVX 1500 D Phone Setting Up the Polycom VVX 1500 D Phone Setting Up the Provisioning Server For example, C\test\VVX1500 Deploying Phones From the Provisioning Server Creating an Application Configuration File Deployment Guide for the Polycom VVX 1500 D Phone Advanced Reboot Phone Locating the Latest Software Upgrading the Phone’s SoftwareDownloading New Software to the Phone Deployment Guide for the Polycom VVX 1500 D Phone Calling Troubleshooting the Polycom VVX 1500 D PhoneCalling Polycom VVX 1500 D Display Select Status Lines and then Polycom VVX 1500 D DisplayApplication Configuration File sip.cfg Configuration FilesPer-Phone Configuration File phone1.cfg Using the Web Interface on Master Configuration FileProtocol voIpProt Application Configuration FileUser Preferences up Video Settings videoEvent Logging log Call Handling Configuration callSecurity sec Microbrowser mb Per-Phone Configuration FileRegistration reg Deployment Guide for the Polycom VVX 1500 D Phone Setting Up an FTP Server Miscellaneous Administrative TasksSetting Up an FTP Server Deployment Guide for the Polycom VVX 1500 D Phone Index Deployment Guide for the Polycom VVX 1500 D Phone