Polycom 1500 D manual Modifying Phone’s Configuration Using the Web Interface

Page 17

Setting Up the Polycom VVX 1500 D Phone

Modifying Phone’s Configuration Using the Web Interface

You can make changes to the phone’s configuration through the web interface to the phone. The factory default username and password for the web interface is Polycom and 456 respectively (the username is case sensitive).

Note	Blind transfer, call recording, picture frame, corporate directory (LDAP Integration),
	and phone server redundancy cannot be enabled/disabled through the web
	interface. You cannot change the displayed language through the web interface.
	You must make changes for these features through the configuration files. Refer to
	Deploying Phones From the Provisioning Server on page 2-12.
Note

	Changes made through the web interface are written to the override file (highest
	priority). These changes remain active until Settings > Advanced > Admin
	Settings> Reset to Default > Reset Local Config... is performed.

To configure the phone through the web interface:

>>Using your chosen browser, do the following:

a To get the phone’s IP address, press the Menu key, and then selecting Status > Platform > Phone. Scroll down to see the IP address.

b Enter the phone’s IP address as the browser address.

You will be prompted for the web interface username and password. A web page similar to the one shown below appears.

2 - 7

Image 17

Contents SIP 3.2.2 November 2009 1725-16823-001 Rev. a Trademark Information About This Guide Deployment Guide for the Polycom VVX 1500 D Phone Contents Deployment Guide for the Polycom VVX 1500 D Phone Overview Supported Phone Features Unsupported Phone FeaturesUnsupported Phone Features Supported Phone FeaturesOverview Deployment Guide for the Polycom VVX 1500 D Phone Setting Up the Polycom VVX 1500 D Phone Refer to Upgrading the Phone’s Software on Connecting the Phone to the NetworkTime and Date Display Browser Protocol Configuring the PhonesProtocol Time and Date DisplayBrowser Make/Model Protocol Software Version Deployment Guide for the Polycom VVX 1500 D Phone Deploying Phones From the Provisioning Server on Modifying Phone’s Configuration Using the Web InterfaceDeployment Guide for the Polycom VVX 1500 D Phone Setting Up the Polycom VVX 1500 D Phone Setting Up the Provisioning Server For example, C\test\VVX1500 Deploying Phones From the Provisioning Server Creating an Application Configuration File Deployment Guide for the Polycom VVX 1500 D Phone Advanced Reboot Phone Locating the Latest Software Upgrading the Phone’s SoftwareDownloading New Software to the Phone Deployment Guide for the Polycom VVX 1500 D Phone Calling Polycom VVX 1500 D Display Troubleshooting the Polycom VVX 1500 D PhoneCalling Select Status Lines and then Polycom VVX 1500 D DisplayPer-Phone Configuration File phone1.cfg Configuration FilesApplication Configuration File sip.cfg Using the Web Interface on Master Configuration FileProtocol voIpProt Application Configuration FileUser Preferences up Video Settings videoSecurity sec Call Handling Configuration callEvent Logging log Microbrowser mb Per-Phone Configuration FileRegistration reg Deployment Guide for the Polycom VVX 1500 D Phone Setting Up an FTP Server Miscellaneous Administrative TasksSetting Up an FTP Server Deployment Guide for the Polycom VVX 1500 D Phone Index Deployment Guide for the Polycom VVX 1500 D Phone