Polycom manual Deployment Guide for the Polycom VVX 1500 D Phone

Page 40

Deployment Guide for the Polycom VVX 1500 D Phone

7.Select Page >Shared folders to specify the server-side directory where the provisioning files will be located (and the log files uploaded).

8.Select Add and pick the directory.

9.To allow the phone to upload logs onto the provisioning server, select the Shared Folders->Files->Select Write and Delete checkboxes, and then select OK.

10.Copy the configuration files from the software download into the directory specified above.

11.Determine the IP address of the provisioning server by entering ipconfig at a command prompt to display the server network configuration.

The IP Address of the provisioning server is shown.

12.Do the following to configure the phone to point to the IP address of the server:

a Press the phone’s Menu key.

bThrough the menu, select Settings >Advanced >Admin Settings >Network Configuration.

When prompted for the administrative password, enter 456.

cScroll down to Server Menu, then press the Edit soft key.

dUsing the right arrow key, select FTP as the Server Type.

eEnter the IP address from step 11 as the Server Address, and then press the OK soft key.

fEnter the username and password from steps 5 and 6 as the Server User and Server Password.

gScroll down Save & Reboot, then press the Select soft key.

The phone will reboot.

The phone will upload two logs files to the directory specified in step 9: <MACaddress>-app.logand <MACaddress>boot.log .

B - 2

Image 40

Contents SIP 3.2.2 November 2009 1725-16823-001 Rev. a Trademark Information About This Guide Deployment Guide for the Polycom VVX 1500 D Phone Contents Deployment Guide for the Polycom VVX 1500 D Phone Supported Phone Features Unsupported Phone Features OverviewSupported Phone Features Unsupported Phone FeaturesOverview Deployment Guide for the Polycom VVX 1500 D Phone Setting Up the Polycom VVX 1500 D Phone Connecting the Phone to the Network Refer to Upgrading the Phone’s Software onConfiguring the Phones Time and Date Display Browser ProtocolBrowser Time and Date DisplayProtocol Make/Model Protocol Software Version Deployment Guide for the Polycom VVX 1500 D Phone Modifying Phone’s Configuration Using the Web Interface Deploying Phones From the Provisioning Server onDeployment Guide for the Polycom VVX 1500 D Phone Setting Up the Polycom VVX 1500 D Phone Setting Up the Provisioning Server For example, C\test\VVX1500 Deploying Phones From the Provisioning Server Creating an Application Configuration File Deployment Guide for the Polycom VVX 1500 D Phone Advanced Reboot Phone Upgrading the Phone’s Software Locating the Latest SoftwareDownloading New Software to the Phone Deployment Guide for the Polycom VVX 1500 D Phone Calling Troubleshooting the Polycom VVX 1500 D PhoneCalling Polycom VVX 1500 D Display Polycom VVX 1500 D Display Select Status Lines and thenApplication Configuration File sip.cfg Configuration FilesPer-Phone Configuration File phone1.cfg Master Configuration File Using the Web Interface onApplication Configuration File Protocol voIpProtVideo Settings video User Preferences upEvent Logging log Call Handling Configuration callSecurity sec Per-Phone Configuration File Microbrowser mbRegistration reg Deployment Guide for the Polycom VVX 1500 D Phone Setting Up an FTP Server Miscellaneous Administrative TasksSetting Up an FTP Server Deployment Guide for the Polycom VVX 1500 D Phone Index Deployment Guide for the Polycom VVX 1500 D Phone