Polycom 1725-36165-001 manual Use PTT Vibrate, Transmit on the Priority Channel, End a PTT Call

Using the Push-to-talk Features of Your SpectraLink 8030 Wireless Telephone

Use PTT Vibrate

To enhance the alerting of a PTT call, PTT Vibrate may be enabled on the Config menu.

When PTT Vibrate is enabled, the handset will vibrate three times whenever a PTT broadcast is received, whether the handset is in standby or in a call. If in a call, the chirp alert will also sound. The vibration does not replace any PTT tone volume already set. To set the handset for PTT vibrate only, enable PTT Vibrate and set the tone volume to zero.

PTT Vibrate is disabled by default.

Transmit on the Priority Channel

Press and release the TALK button. Select the priority channel from the list. Press and hold TALK, then speak. The priority channel takes priority over all other calls in progress.

End a PTT Call

Press the END key to exit the PTT call.

Change the PTT Volume

Press the up/down volume buttons on the side of the handset while transmitting or receiving a PTT call.

Answer a Telephone Call during a PTT Transmission

Press the START key. PTT transmissions will be pre-empted by the telephone call.

Start a Telephone Call during a PTT Transmission

Press the START key and dial the number. PTT transmissions will be pre-empted by the telephone call.

1725-36165-001-G.doc 55