Integrating the SoundPoint IP 7000 Conference Phone with a Polycom HDX System
Setting Up the Polycom HDX System
For information on installing the Polycom HDX system, refer to the Setup
Sheet for your system at http://www.polycom.com/videodocumentation.
For information on configuring the Polycom HDX system, refer to the
Administrator’s Guide for Polycom HDX Systems at
http://www.polycom.com/videodocumentation.
Updating the Polycom HDX System Software
Before you connect the SoundPoint IP 7000 phone to a Polycom HDX system, verify that the software running on the Polycom HDX system is at version 2.5 or later. To verify the software version, using the HDX remote, go to to System
>System Information. If the software is not 2.5 or later, update the system software using the Polycom HDX Web Interface, so the system will integrate with the phone. Refer to Installing Polycom HDX Software and Options and the Release Notes for Polycom® HDX Systems available at www.polycom.com/videodocumentation.
Connecting the Phone to the Polycom HDX System
Note | If a Polycom SoundStructure™ |
| Polycom HDX system, you cannot connect the SoundPoint IP 7000 phone to it. If |
| you connect the phone, the message |
| Contact IT Manager.” appears. |
|
|
| When you connect the phone to the Polycom HDX system, you need the |
| Polycom HDX Microphone Cable, which is the cable used to connect your |
| Polycom HDX Microphone to the Polycom HDX system. |
Note |
|
Only a single SoundPoint IP 7000 phone may be connected to a Polycom HDX | |
| system. Additionally, up to two Polycom HDX Microphone Arrays may be |
| |
|
|
To connect the SoundPoint IP 7000 phone to the Polycom HDX system:
1.Disconnect the Polycom HDX Microphone from the Polycom HDX system.
If you have an additional Polycom HDX Microphone Cable, leave the existing microphone connected to the Polycom HDX system and use the additional cable to connect the phone to existing the microphone.
5