RTS manual Menu List for DKP-8, DKP-12, and KP-12 Keypanels

Menu List for DKP-8, DKP-12, and KP-12 Keypanels

PAGE 1-4See “Top Level Menu, Page (1-4)” on page 22.

TGL LISN See “Top Level Menu, TGL LISN (Toggle Listen ON/OFF)” on page 23.

Changes setup pages on the keypanel or any connected expansion panels.

Lets you activate/deactivate a key’s listen assignment independently of talk. Only available on push button keypanels.

MENU MODE In the top level menu, tap SELECT on MENUS to turn on the MENU indicator. Then, turn SELECT to view the following

See “Menu Mode” menus. Tap the SELECT control to select a menu to view items in that menu. on page 25.

AUTODIAL Menu	Stores autodial numbers for use by a phone or autodial key.
KEY ASGN Menu
AUTODIAL	Assigns a key to dial a specific autodial number that was entered using the AUTODIAL menu,
	above.
AUTOFUNC	Assigns any of the available auto functions (also called special functions) to a key.
CLEAR	Clears talk/listen assignments. (Does not clear key options, see “CLR OPT” in KEY OPT menu.
COPY	Copies one key’s assignment to another key
LISTS
ICOM	Accesses another intercom system for key assignment (trunked intercoms only).
PL	Accesses party line list for key assignment
GRP	Accesses group list for key assignment
IFB	Accesses IFB list for key assignment.
ISO	Accesses ISO list for key assignment.
P-P	Accesses point-to-point list for key assignment.
RLY	Accesses the intercom system’s list of relays for key assignment.
SPCL	Accesses special lists for key assignment.
UPL	Accesses UPL resources for key assignment.
LOCAL I/O	Assigns relays or open collector outputs to keys. (Appears only on KP-12 with GPI module
	options.)
PHONE	Assigns an all-purpose phone key for use with TIF Telephone Interface.
REDIAL	Assigns a redial key for use with a TIF Telephone Interface.
KEY OPT Menu
BTN LOCK	Locks intercom keys in the ON or OFF position, or unlocks them.
CHIME	Adds a chime tone to an intercom key for incoming call announcement.
CLR OPT	Clears all options from a key.
COPY	Copies one key’s options to another key.
EXCLUSIVE	Assigns keys for use with the exclusive key option.
GROUP 1-4	Assigns several keys for simultaneous activation when a group master key is activated.
LATCHING	Turns the latching feature ON or OFF for selected keys.
SOLO	Assigns a key that, while activated, will temporarily turn OFF all other active keys.
SERVICE Menu
DIMMER	Adjusts brightness of displays.
FOOT SW	Enables or Disables the use of the foot switch. (Only available if the GPI board is installed)
KEY TYPE	Select push-button or lever style keys, whichever the keypanel has.
LOCK	Locks out access to all SERVICE menu items, and locks HDST / SPKR / PRGM selection.
MIC CNTL	Selects microphone input from either a headset, panel mic or from the EXT MIC IN connector.
MIC COMP	Adjusts the MIC compression of the audio source.
MIC GAIN	Adjusts the mic gain.
MOD ASGN	Defines which keys occupy which positions on the keypanel and expansion panels.
MUTE LVL	Adjusts the amount of listen muting when talk keys are activated.
OPTO-ISO	Assign opto-isolator inputs to actuate keys, pages, etc. (KP-12 with GPI module only.) See
	“Menus, SERVICE, OPTO-ISO(KP-12 with GPI Module Only)” on page 43.
OUT CTRL	Assigns whether you listen to audio through either HEADSET or SPEAKER
RESET	Clears all settings that are saved locally at the keypanel.
SAVE CFG	Saves all local settings.

4