RTS DKP-8 manual Menus, Service Menu, Menus, SERVICE, Dimmer, Menus, SERVICE, KEY Type

Page 44

Menu Mode

Menus, SERVICE MENU

General Description

Use this menu to set the logical keypanel address during installation and to set general operating features such as display brightness, etc. Any changes you make in this menu must be saved locally if you want them to be retained for future use. Oth- erwise, the settings will be lost when the keypanel is turned OFF. See “Menus, SERVICE, SAVE CFG” on page 44..

Menus, SERVICE, DIMMER

DIMMER set the brightness for the front panel displays.

1.After selecting DIMMER, turn the SELECT control to set the brightness. You can preview the new brightness level in the call waiting window.

2.When the brightness is set to the desired level, tap the SELECT control to activate the change for all the displays.

3.Double-tap the SELECT control to return to the previous menu level. Or, press and hold the SELECT control for two seconds to exit menu mode.

Remember to save you changes if you want them retained for future use. See “Menus, SERVICE, SAVE CFG” on page 44..

Menus, SERVICE, FOOT SW (with GPI module ONLY)

NOTE: The foot switch must be connect at J6 (Opto-4 & Opto-3) on the back of the KP-12. It also must be cabled across pins 5 & 9 of the Opto-4 & 3 DB-9 connector.

When the Foot switch is enabled, activated talk keys enter standby mode and the talk LED turns orange. Once you press the foot switch, the crosspoint is closed and the Talk LED turns green for normal operation.

1.To change the key type, select FOOT SW.

2.Then, turn the SELECT control to choose either ON or OFF, and tap SELECT control.

3.Double-tap the SELECT control to return to the previous menu level. Or, press and hold the SELECT control for two seconds to exit the menu mode.

Remember to save your changes if you want them retained for future use. See “Menus, SERVICE, SAVE CFG” on page 44..

Menus, SERVICE, KEY TYPE

The keypanel comes with either push-button or lever-style intercom keys. The correct type is factory-set and should not require change. (The correct setting is maintained even if the keypanel is reset.)

1.To change the key type, select KEY TYPE.

2.Then, turn the SELECT control to choose either SINGLE (push-button keys) or LEVEL, and tap SELECT.

3.Double-tap the SELECT control to return to the previous menu level. Or, press and hold the SELECT control for two seconds to exit the menu mode.

Remember to save your changes if you want them retained for future use. See “Menus, SERVICE, SAVE CFG” on page 44..

Menus, SERVICE, LOCK/UNLOCK

Use this item to lock or unlock menu mode. When menu mode is locked, all items in Table 1 on page 26 are locked out and can only be accessed by entering a 4-digit passcode.

Lock the menu as follows:

38

Page 43 Page 45
Image 44
Page 43 Page 45
Contents User Instructions This package should include the following Contents Contents Contents Contents Read ME First Page Menu List for DKP-8, DKP-12, and KP-12 Keypanels Menu Item DescriptionMenu List for DKP-8, DKP-12, and KP-12 Keypanels DKP-8 Keypanel Reference View Push-button version shown DKP-12 Keypanel Reference View Push-button version shown KP-12 Keypanel Reference View Push-button version shown Menu List for DKP-8, DKP-12, and KP-12 Keypanels MD1, Key Type and Set Addr Messages Power-Up and Initial SettingsApplying Power Power-Up Indications Keys and Displays Talk and Listen IndicatorsBasic Intercom Operation Copy Call Waiting Headset/Speaker/PRGM Selection and Volume AdjustmentFlashing Call Indicator Manual Dialing with an All-Purpose Phone Key Telephone OperationAll-Purpose Phone Key Operation Dialing an Autodial Number Using an All-Purpose Phone Key Dialing a Number Using a Redial or Autodial KeyTop Level Menu, - - Clear call waiting Using the Top-Level MenuGeneral Description Top Menu Level, Call List Names Top Level Menu, DisplayTop Level Menu, Display, Level Top Level Menu, Display, KEY IcomTop Level Menu, Display, KEY Type Top Level Menu, Display, Listen Top Level Menu, Display, Page UseTop Level Menu, Display, Port Num Top Level Menu, Display, SoloTop Level Menu, Key List Top Level Menu, LevelTop Level Menu, Lists Top Level Menu, Lists, IcomTop Level Menu, Lists, Ifsl Top Level Menu, Lists, P-P Point-to-PointTop Level Menu, Lists, IFB Top Level Menu, Lists, Spcl Special Lists Top Level Menu, Lists, ISOTop Level Menu, Lists, RLY Relays Top Level Menu, Lists, UPL Top Level Menu, MenusTop Level Menu, Top Level Menu, TGL Lisn Toggle Listen ON/OFF Using the Top-Level Menu Menu Mode Select Control Operation in Menu ModeKeypanel Menus in Menu Mode Menus, Autodial for KP-12/DKP-12 OnlyMenus, KEY Asgn Menus, KEY ASGN, General DescriptionMenus, KEY ASGN, Autodial For KP-12, DKP-12 Only Menus, KEY ASGN, AutofuncMenus, KEY ASGN, Clear Menus, KEY ASGN, CopyMenus, KEY ASGN, Lists General DescriptionMenus, KEY ASGN, LISTS, IFB Menus, KEY ASGN, LISTS, IcomMenus, KEY ASGN, LISTS, PL Party Line Tap SelectMenus, KEY ASGN, LISTS, P-P Point-to-Point Menus, KEY ASGN, LISTS, IfslMenus, KEY ASGN, LISTS, ISO Menus, KEY ASGN, LISTS, RLY Relays Menus, KEY ASGN, LISTS, Spcl Special ListsMenus, KEY ASGN, LISTS, UPL Menus, KEY ASGN, Local I/O For KP-12 OnlyMenus, KEY ASGN, Phone For KP-12, DKP-12 Only Menus, KEY ASGN, Redial For KP-12, DKP-12 Only Menus, KEY ASGN, UPLMenus, KEY OPT, Chime Menus, Key Opt MenuMenus, KEY OPT, BTN Lock Button Lock Menus, KEY OPT, CLR OPT Menus, KEY OPT, CopyMenus, KEY OPT, Exclusive Menus, KEY OPT, GroupMenus, KEY OPT, Latching Menus, KEY OPT, SoloMenus, Service Menu Menus, SERVICE, DimmerMenus, SERVICE, Foot SW with GPI module only Menus, SERVICE, KEY TypeMenus, SERVICE, MIC Ctrl Menus, SERVICE, MIC CompSelect MENUS, SERVICE, Lock Select SERVICE, UnlockHow Mods Work Menus, SERVICE, MIC GainMenus, SERVICE, MOD Asgn Procedure to Assign Mods Menus, SERVICE, Mute LVL Using Multiple Expansion Panels KP-12 OnlyMenus, SERVICE, OPTO-ISO KP-12 with GPI Module Only Call waiting window displays OPT1Menus, SERVICE, OUT Ctrl Menus, SERVICE, ResetMenus, SERVICE, Save CFG Menus, SERVICE, SET AddrMenus, SERVICE, Test PNL Menus, SERVICE, SidetoneMenus, SERVICE, Tally Menus, SERVICE, Tone Settings for Intercom Port Numbers 596 KP-12 Audio Transmit Board Connections Page Replacing the KP-12 Power Supply Replacing the KP-12 Power SupplyCN2 Page Portland Avenue South Burnsville, MN 55337 U.S.A
Related manuals
Manual 2 pages 35.86 Kb
Top Page Image Contents