Using the
1.To talk to the selected special list, press and hold the SELECT control.
2.To assign the special list to an intercom key for future use, press and hold the SELECT control, then tap an intercom key.
•If restrictions against key assignment have been imposed using the intercom system configuration software, the intercom key may ignore the assignment. In this case, contact the intercom system administrator if you need to make a change.
•SPCL key assignments are automatically uploaded to the intercom system and saved to the
•When you assign a SPCL key using this method, only the talk assignment is affected and not the listen assignment. If you want to change or add a listen assignment you will have to access menu mode and use the “Menus, KEY ASGN, General Description” on page 27.
To return to the
Top Level Menu, Lists, UPL
When you select UPL, a list of UPL Resoures (URs) will appear in the call waiting window. Turn the SELECT control to locate the desired UR.
1.To talk to the selected UPL, press and hold the SELECT control.
2.To assign the UPL to an intercom key for future use, press and hold the SELECT control, then tap an intercom key.
•If restrictions against key assignment have been imposed using the intercom system configuration software, the intercom key may ignore the assignment. In this case, contact the intercom system administrator if you need to make a change.
•UPL key assignments are automatically uploaded to the intercom system and saved to the
•When you assign a UPL key using this method, only the talk assignment is affected and not the listen assignment. If you want to change or add a listen assignment you will have to access menu mode and use the “Menus, KEY ASGN, General Description” on page 27.
To return to the
Top Level Menu, Menus
Menus provide complete access to advanced setup and key assignment features. This menu is discussed separately in “Menu Mode” on page 25.
Top Level Menu, Page (1-4)
Each keypanel has four setup pages of key assignments. One setup page is used for the keypanel, and one is used for each expansion panel
To change setup pages, turn the SELECT control to select the desired setup page. Then tap the SELECT control. Next tap any key on the keypanel or the expansion panel
To return to the
NOTE: If you have assigned any options to keys using the KEY OPT menu, note these options may not change along with the setup page, depending on which version of firmware is installed in the
22