RCA 25250 manual Remove Handset, De-Register Only applicable for base

Programming the Telephone

Register

From the Phone Setting Menu:

1.Press the VOL (- or +) button to scroll to Register.

2.Press SELECT soft key. “Press base unit page button until beep” shows in the display.

3.Press and hold the Page button on base for 5 seconds.

4.“Registration” displays to indicate the base is now in registration mode.

5.If the registration is successful, the handset shows “Registration complete” for 2 seconds and emits a confirmation tone.

6.If the registration is failed (i.e. timeout), the handset shows “REGISTRATION FAILED!” for 2 seconds and emits an error tone.

Remove Handset

De-registration cancels registration. During the de-registration process, keep the handset near the base.

WARNING: It is not recommended that a handset be deregistered unless absolutely necessary because once a handset is deregistered, that handset’s telephone features cannot be used until the handset is re-registered.

From the Phone Setting Menu:

1.Press the VOL (- or +) button to scroll to the Remove handset.

2.Press SELECT soft key. “Remove handset?” shows on the display.

3.Press the YES soft key to confirm de-registration. “Saved” shows in the display and then shows “Press “REG” to initiate registration” in the handset.

NOTE: You can press the REG soft key to enter the registation mode again.

De-Register (Only applicable for base)

From the Phone Setting Menu:

1.Press the VOL (- or +) button to scroll to the Deregistration.

2.Press SELECT soft key. The list of all registered handsets will be shown, and use the VOL (- or +) button to scroll to your selection.

3.Press the SELECT soft key. “Remove handset?” shows on the display.

4.Press YES soft key to confirm de-registration. “Saved” shows in the display and then shows “Press “REG” to initiate registration” in the handset.

17