Aiphone IS installation manual System configuration examples, Standard IP system, Ip Ip Ip

Page 5

System configuration examples

Standard (IP) system

The following is an example of standard (IP) system for controlling security and communication for facilities.

A site must be configured with an IP-based system.

A standard (IP) system can consist of local systems and IP units.

A local system (Hard wired network system) without connecting to an IP network can also be an independent system.

When using a local system as an independent system, it needs at least one central control unit (IS-CCU). To connect a local system to a standard (IP) system, one IP control unit (IS-IPC) is needed.

An IP unit (PC master station, IP door station or IP master station) can be connected directly to a LAN.

In a site, up to 32 IP units (including up to 8 IP control units) can be connected.

Site 1

IP

Telephone

: Control office, etc.

PSTN / private line (North America only)

Internet / WAN

Site 3

Site 32

Standard (IP) system

Site 2

 

 

 

PBX telephone

 

 

LAN (IP network)

 

IP

 

IP

IP

IS-IPC

 

IS-IPC

IS-IPC

IS-CCU

 

IS-CCU

IS-RCU

IS-RCU IS-RCU IS-RCU IS-RCU

IS-SCU IS-SCU

IS-RCU

 

 

 

 

Building 3

Building 1

 

Building 2

 

IP IP IP

Building 4

Local system

This is also a local system, however no communication can be made on this system without connecting with an IP network.

IP IP unit

5

Image 5
Contents Installation Manual About this Manual ContentsNegligence could result in death or serious injury PrecautionsSystem Configurations IP IP IP System configuration examplesStandard IP system Connections System connection diagramIP IP Used How to connect or disconnect stranded wiresUnit Details AccessoriesControl unit common information MountingCentral control unit IS-CCU Part namesSpecifications BNC ConnectionsAdd-on control unit IS-SCU Refer to Output specifications →P.11 Room sub control unit IS-RCU Room sub control unit IS-RCUSet to this position when this unit is connected to IS-IPC IP control unit IS-IPC LAN Surface wiring Mounting When mounting on a wallBack wiring Connect the CAT5e/6 cable When mounting on a desktop standOption wires to the unit Zoom picture Mounting locations IS-DV and IS-DVFOption wires to the unit with Install the back box in the wall,Fasten the unit to Mounting surface Insert the transparent name plate. IS-DV and IS-DVFClose it until it clicks Connections IS-DV and IS-DVFConnections IS-SS Room sub station IS-RS Connect the CAT5e/6 cable and option wires to the unitC1 C30 Connect the power wires Power supply unit IS-PU-UL and IS-PU-SAC cord requirements Plug in the AC cord securelyTechnical precautions Technical Data and PrecautionsTechnical data FCC Warranty
Related manuals
Manual 46 pages 50.45 Kb