Aiphone IS Unit Details, Control unit common information, Accessories, Mounting

UNIT DETAILS

Control unit common information

*The information on this page is common to Central control unit (IS-CCU), Add-on control unit (IS-SCU), Room sub control unit (IS- RCU) and IP control unit (IS-IPC).

■ Accessories

・Mounting bracket × 2	・Installation manual (a booklet)*1 × 1
・Screw (for wall-mounting) × 4	・CD-ROM (Installation manual, Setting manual and Operation manual)*2 × 1
・Screw (for rack-mounting) × 4	・China RoHS paper × 1

・Screw (for fixing mounting bracket) × 6

■ Mounting

*1: IS-CCU only

*2: IS-CCU and IS-IPC only

<When mounting into the 19-inch rack>

1 Attach the mounting brackets to the unit.

Screw hole x 3

Mounting bracket x 2 (included)

Screw (for fixing mounting bracket) x 6 (included)

NOTE:	Screw (for rack-mounting) x 4 (included)
Do not use screws other than the included ones.

<When mounting on a wall>

1 Attach the mounting brackets to the unit.

NOTE:

Do not use screws other than the included ones.

Screw (for fixing mounting bracket) x 6 (included)

Screw (for wall-mounting) x 4 (included)

2 Mount the unit on the wall with the screws for wall-mounting.

19-inch rack (2U)

	2 Set the unit in the
44.5 mm	19-inch rack and fix
	it with screws.
(1-3/4")

NOTE:

If the control unit is installed in a closed rack or multiunit rack assembly, the temperature around the unit may become high when operating. Install the control unit in an environment whose temperature will not rise beyond the maximum permissible ambient temperature of the control unit.

450 mm (17-3/4")

65 mm (2-9/16") 65 mm (2-9/16")

NOTE:

When mounting on a wall, mount the terminal side down.

9