Aiphone IS installation manual Mounting When mounting on a wall, Back wiring, Surface wiring

Page 18

Color monitor master station (IS-MV)

*For the part names and their functions, see the OPERATION MANUAL.

Accessories

Mounting bracket × 1 Desktop stand × 1 Tie-wrap × 1

Name plate × 1

Name card × 1

Screw (15mm (5/8"), for wall-mounting) × 4 Screw (25mm (1"), for gang box) × 4

Screw (10mm (7/16"), for desktop stand) × 4 China RoHS paper × 1

Mounting

When mounting on a wall

<Back wiring>

Name card × 1 (included*1)

3

Mount the unit on the mounting bracket.

3-gang box NOTE:

A single-gang box can also be used for wiring. When using

The unit

CAT5e/6 cable

a single-gang box, fasten the mounting bracket to the wall directly by using the screw holes for 3-gang box.

Name plate × 1 (included*1)

Filling in the target names on the name card

1Remove the transparent name plate by pushing either upper or lower side of the

plate.

*Remove the name card if necessary. 2 Fill in the target names on the white

space of the name card.

3 Replace the name plate.

*1: The name plate and name card are attached to the unit with shipment.

<Surface wiring>

Mounting bracket

(attached to the unit with shipment)

Screw (for gang box) × 4 (included)

1 Fasten the mounting

 

bracket to the wall.

Option wires

 

2 Connect the CAT5e/6 cable and option wires to the unit.

Connect the CAT5e/6 cable and option wires to the unit and route them as shown.

92mm (3-5/8")

83.5mm (3-5/16")

Mounting bracket

(attached to the unit with shipment)

Screw (for wall-mounting) × 4 (included)

The unit

18

Image 18
Contents Installation Manual Contents About this ManualPrecautions Negligence could result in death or serious injurySystem Configurations System configuration examples Standard IP systemIP IP IP System connection diagram ConnectionsIP IP How to connect or disconnect stranded wires UsedControl unit common information AccessoriesUnit Details MountingPart names SpecificationsCentral control unit IS-CCU Connections BNCAdd-on control unit IS-SCU Refer to Output specifications →P.11 Room sub control unit IS-RCU Room sub control unit IS-RCUSet to this position when this unit is connected to IS-IPC IP control unit IS-IPC LAN Mounting When mounting on a wall Back wiringSurface wiring When mounting on a desktop stand Option wires to the unitConnect the CAT5e/6 cable Mounting locations IS-DV and IS-DVF Zoom pictureFasten the unit to Mounting surface Install the back box in the wall,Option wires to the unit with Insert the transparent name plate. IS-DV and IS-DVFConnections IS-DV and IS-DVF Close it until it clicksConnections IS-SS Connect the CAT5e/6 cable and option wires to the unit Room sub station IS-RSC1 C30 AC cord requirements Power supply unit IS-PU-UL and IS-PU-SConnect the power wires Plug in the AC cord securelyTechnical Data and Precautions Technical dataTechnical precautions Warranty FCC
Related manuals
Manual 46 pages 50.45 Kb