Philips SHB7110/37 Automatic power saving, Whole outer shell of the earpieces is touch sensitive

7Using your touch sensitive Philips Tapster Bluetooth stereo headset

7.1Connect your Philips Tapster Bluetooth stereo headset to your mobile phone

Turn on the headset by pressing On/Off until the LED lights up. Once turned on the headset will reconnect automatically to the last device it was connected to. If the last connected device is not available the headset tries to reconnect to the second to last device that was connected to the headset.

If you turn the mobile phone or its Bluetooth feature on after turning on the headset connect the headset from your mobile phones Bluetooth menu.

7.2Automatic power saving

If your headset cannot find any Bluetooth device to connect to in range within five minutes it will automatically power down to save battery life.

7.3Controlling your touch sensitive Philips Tapster Bluetooth stereo headset

Your Philips Tapster Bluetooth stereo headset uses intuitive touch controls so you can easily control your music and calls. After a few minutes of familiarizing yourself with the new touch controls you should find this way of controlling the headset faster and simpler than button based headsets.

Tip

To avoid accidental activation of music or calls the touch sensitive areas of the headset are only enabled after you inserted the headset in your ears.You will hear an ascending activation and descending de-activation tone when inserting or removing your Philips Tapster Bluetooth stereo headset.

The whole outer shell of the earpieces is touch sensitive.

Touch sensitive surface

You can control all functions of the headset with these basic motions.

Tap

Tap the surface

Double tap

Tap the surface twice quickly

Press

Press and hold for approximately 1 second

Slide

Slide your finger forward or backward across the surface of the earpiece

E N G L I S H