![](/images/new-backgrounds/1277386/27738621x1.webp)
6.2Pair your Philips Tapster Bluetooth stereo headset with your mobile phone
Your Philips Tapster Bluetooth stereo headset must be paired to your mobile phone before connecting and using it for the first time with your phone. “Pairing” will establish a unique encrypted link between your mobile phone and your headset.
Pairing has to be done only once, before using your headset with your mobile phone or another Bluetooth device for the very first time.
•Only if you pair more than two different Bluetooth devices with your headset, you may need to pair the previously paired devices again.Your headset can store up to two paired devices in its memory, if you pair more than two devices the oldest paired device is overwritten.
•“Pairing” is different from “connecting” as pairing typically only has to be done once, whereas the phone and headset need to “connect” every time one of the two devices was turned off or out of range.With typical phone settings your Philips Tapster Bluetooth stereo headset will connect automatically to your phone after you turned on the headset.
2Make sure your mobile phone is on and its Bluetooth feature is enabled.
3Press On/Off on the right earpiece until the LED starts blinking red and blue alternately.The headset will now remain in “pairing mode” for 5 minutes.
LED
4Pair the headset with your mobile phone as described below. A sample pairing is shown below.
E N G L I S H
To pair your headset with your mobile phone
1Make sure your headset is charged and turned Off.
on/off | charging socket |
Check your phone’s user manual for specific details.
•Access the Bluetooth menu on your mobile phone typically called “Setup”,“Settings”, “Bluetooth” or “Connectivity”.
•Select the option to discover, add or search for a Bluetooth device.After a few seconds your phone should indicate that it has found the “Philips Tapster”.
•Upon selecting the “Philips Tapster” on your mobile phone typically you will need to confirm the pairing and enter a passcode.
11