Philips SHB7110 manual Please enter the headsets passcode 0000 four zeros, Fitting your headset

Page 12

Please enter the headsets passcode “0000” (four zeros).

After successful pairing, the headset will connect to the mobile phone.You will hear a long beep to confirm successful pairing and the headsets LED will change from flashing red/blue to periodically flashing blue every three seconds.

4Optional: For an extra-secure sports fit, attach the earhook.

B

A

6.3Fitting your headset

1Select your cap size for the best find and optimum sound performance. It is not unusual to fit two different exchangeable rubber ear cap sizes on the right and left earpiece.

L

M

S

2Place the exchangeable rubber ear cap in your ear and rotate the headset backward for a snug fit.

3Bring the connecting wire to the back of the neck and insert the second earpiece.

A. Insert the ball between the earpiece and the earshell until it rests in the socket which

is located between the earpiece and the earshell.

B.Rotate the hook to fit your ear.

C.Slide the hook over your ear.

D.Follow steps 2 and 3 as above.

12

Image 12
Contents Philips Tapster Table of contents Welcome Listen at reasonable volumes for reasonable periods of time Electric-, Magnetic- and Electromagnetic Fields EMFGeneral maintenance To avoid damage or malfunction About operating and storage temperaturesRemoving the battery will destroy the product Address for Philips accessories service center  WarningOperation is subject to the following two conditions This device may not cause interferenceFor wireless stereo listening For wireless music controlFor wireless handsfree communication What’s in the boxWith your Philips Tapster Bluetooth stereo headset you can Overview of your Philips Tapster Bluetooth stereo headset Get started Charge your headsetTip To pair your headset with your mobile phone Make sure your headset is charged and turned Off On/offPlease enter the headsets passcode 0000 four zeros Optional For an extra-secure sports fit, attach the earhookFitting your headset Automatic power saving Whole outer shell of the earpieces is touch sensitiveVolume Slide forward / backward Up / down Play / pause Tap Dynamic bassOn / off Press Call and continue Current activeStoring and carrying your headset Learn about the battery status Learn about simultaneous use for voice and audioLearn about FullSound Page Bluetooth headset does not switch on. Battery is very low No connection to mobile phone. Bluetooth disabledHeadset falls out of ear / does not fit properly Touch controls are not working. Out-of-ear autolock engagedMusic device does not support this feature Avrcp profile Audio quality is poor and crackling noises can be heardKoninklijke Philips Electronics N.V. All rights reserved