Philips SE6581B/17 manual Scroll n to Change PIN and press o Select, Confirm PIN will be displayed

Page 54

1Press m in idle mode, scroll n to

Advanced Set and press o Select.

2Scroll n to XHD Sound and press o Select.

3Scroll n to select On or Off and press o Select to confirm.

•A validation tone is emitted and the screen returns to the Advanced Set menu.

13.5Change PIN

The PIN is used for setting call barring numbers and registration/unregistration of handsets. The default PIN number is 0000. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required.

Note

The default PIN code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code.

1Press m in idle mode, scroll n to Advanced Set and press o

Select.

2Scroll n to Change PIN and press o Select.

3Old PIN: will be displayed. Enter the current PIN and press o OK.

•The PIN entered will be shown as asterisks (*) on the screen.

•If you enter an incorrect PIN number, an error tone will sound and “Wrong PIN!” will be displayed. Then, you will be

prompted to enter the current PIN again.

4New PIN: will be displayed. Enter the new PIN and press o OK.

5Confirm PIN: will be displayed.

Enter the new PIN again and press o OK to confirm PIN change.

•A validation tone is emitted, Saved! is displayed and the screen returns to the Advanced Set menu.

Tip

If you forget your PIN, you will need to reset your phone to its default settings. For more details, see section 13.8 - “Reset Unit.”

13.6Registration

If you wish to register an additional handset or if you have inadvertently unregistered your phone’s handset and want to re-register it, follow the procedure described below. This is the procedure for registering SE65 handsets. Procedures may vary for other types of handsets. In this case, please refer to the manufacturer of the handset. Additional handsets must be registered to the base station before you can use them. Up to 8 handsets can be registered to one base station.The PIN is required before you can register or unregister handsets.

Note

By default, the PIN is 0000.

52	Advanced settings

Image 54

Contents SE658 US-EN Telephone Answering Machine Page Table of contents Personal settings Using your PhonebookUsing the Call log Use more Your phoneTelephone answering Advanced settingsNetwork Service Machine TAMRemote Access Set the Answer mode Answering Machine SettingsRing Delay Handset Screening Setting the OutgoingImportant Safety Instructions Read and understand all instructionsDamage to the product Environment and safety Environment and safetyBattery requirements Telephone connectionFollowing a power cut, the call in progress is lost PrecautionsEnvironmental care Equipment Approval Information Notification to the Local Telephone CompanyRights of the Phone Company Environment and safety Hearing Aid Compatibility FCC RF Radiation Exposure StatementPower requirements Rbrc seal Electric, Magnetic and Electromagnetic Fields EMFRbrc seal Service Centers US service center Rbrc seal Your phone Power supplyGuarantee Congratulations on your purchase and welcome to PhilipsSelect key o Overview of your handset Event LEDEarpiece Display Back/Clear key cMute key s Headset jack Battery doorNumber keys Call transfer key & Intercom keyDisplay icons and Messages BackClear Overview of the base station Top Menu mode Scroll up in the list. G Back/Clear Key cVolume Keys + Handset locator key a Locate handsetFlash/Call waiting t Speaker key lHold/Intercom key Main display areaGetting started Attach the bracket to the base station as shown below Getting startedInstall your phone Install batteryCharge battery Install optional headset Power upTip Using multipacks Handset screenMenu Name Handset menu structureSE658 has six menus as shown in the following table PhonebookEnter name Clock and Alarm Advanced Settings Handset only Enter PINNetwork Services Handset only Answer Machine Using your phone Enter a Dialing Pause Call using Direct Access MemoryWhile on the phone, press o Option and then o Select to Answer a callSave a redial number into the phonebook Using the Redial listAccess Redial list Delete a redial numberScroll n to Delete and press o SelectUse more of your phone Available Press i in idle mode Activate/Deactivate handset Loudspeaker mode DangerUsing the Intercom Chain dialingTransfer an external call to another unit Answer an external call during intercomClock & Alarm Clock on the base, and press o Select Locate HandsetSet Date and Time Set Alarm Tone Handset only 24HoursStore a contact Phonebook Access phonebookModify a phonebook entry 1 Press m in idle mode To view the details, press o View TipUsing your Phonebook Delete a phonebook entry 1 Press m in idle modeDelete all phonebook entries 1 Press m in idle mode Select phonebook melody Handset only10.7.1 Add/Edit Direct Access Memory Direct Access MemoryYour voice mail access numbers using key 1 or key Delete Direct Access MemoryUsing the Call log Using the Call logAccess the Call log Press u in idle mode, and scroll n to browse the call logDelete a call list entry Save call list entry into the phonebookTo select an entry and press o Menu Menu Scroll n to Delete and press o SelectChange the Handset Name Handset only Personal settingsTo adjust ring volume on the handset Select Handset Name is highlighted. Press o SelectActivate/Deactivate Key Beep Personal Set menuSelect the Display Wallpaper Handset only Display will change as you scroll Press o Select to confirm Select the Color Theme Handset onlyScroll n to Color Theme and press o Select Scroll n to Backlight Time and press o SelectAdvanced Set and press o Select Advanced settingsEasy Call Set Easy Call numberSet Call Barring Mode Advanced settingsScroll n to Conference and press Prompted to enter the current PIN again By default, the PIN isScroll n to Change PIN and press o Select Confirm PIN will be displayedManual registration Reset UnitEasy registration UnregisterScroll n to Auto Prefix and press Scroll n to Reset and press oSet Area Code Press o OK to confirm Prefix is displayed on the screenChange the Dial Mode Change Flash timeAdvanced Set, and press o Select Network Service Default Settings Parameter Default ValueParameter Default Value Network Service Call ForwardChange Call Forward Activation Codes Call Forward screen Call Forward when BusyNetw. Services, and press o Select Select Scroll n to Call Fwd Busy and press o SelectCall Fwd Busy screen Call Forward when UnansweredChange Call Forward when Unanswered Activation Codes Unans, scroll to Deactivate and press o SelectSelect Scroll n to Call Fwd Unans and press o Select Change Call Forward when Unanswered Deactivation CodeAccess Voice Mail Voice MailAccess the Call Return Service Access Info ServiceSelect Scroll n to Settings and press o Select Set Call Return Service NumberSet the Cancel Call Back Number Call the Cancel Call Back NumberSelect Scroll n to Cancel Call BK and press o Select Withhold IDPlaying Messages Telephone answering machine TAMOff via your handset see section Telephone answering machine TAMFunctions available during playback Unplayed messages will not be deletedPlay, Record, or Delete an Outgoing Message Answering Machine Settings Ring Delay Set the Answer modePress o Select Scroll n to Answer Mode and press o Select Machine menuRemote Access Activate/Deactivate Remote AccessKey Action Handset Screening Technical dataTechnical data Screening and press o SelectIcon is not blinking during charge Connection Handset does not switch onHandset does not charge Communication is lost during a callCaller does not hear me Cannot change the settings of my voice mailSound Handset does not ring Product behaviour Keypad does not workAnswering machine does not record calls My handset keeps going into idle modePIN code is wrong Unable to perform remote operationIndex ModeOverview of the base station Overview of your handsetHandset Menu structure Message Handset name Transfer an external call