Philips s10, S10A user manual Incoming messages

Restore the default announcement

1	Tap	from the main menu screen.
2	Select [Announcement] > [Answer &
	rec.] or [Answer only] > [Use default].
	»»A confirmation request is displayed on
3	the handset.
	Tap [Yes] to confirm.
	»»The default announcement is restored.

Set the answering machine language

You can change the language used for the pre-
recorded default announcements.
1	Tap	from the main menu screen.
2	Select [Announcement] > [Voice
3	language].
	Select a language.

»»The setting is saved.

Incoming messages

Each message can be up to 3 minutes long. When you receive new messages, the new message indicator flashes on the answering machine and a confirmation request is displayed on the handset.

Note

•• If you pick up the phone when the caller leaves a message, the recording stops and you can talk to the caller directly.

Note

•• If the memory is full, the answering machine switches to [Answer only] automatically. Delete old messages to receive new ones.

Listen to the incoming messages

You can listen to the incoming messages in the
sequence they are recorded.
1	Tap		from the main menu screen.
2	Select [Play].
	»»New messages start playing. Old
		messages start playing if there is no
		new message.
•	Tap [Back] to stop listening..
•	Press +/- on the left side of the handset to
	increase/decrease the volume.

Delete an incoming message

1 When you listen to the message, tap .

»»The current message is deleted.

Delete all old incoming messages

1 Tap from the main menu screen. 2 Select [Delete all].

»»The handset displays a confirmation request.

3 Select [Yes] to confirm.

»»All old messages are permanently deleted.

Note

•• You can only delete the read messages. No deleted messages can be recovered.

Call screening

You can hear the caller while he is leaving a message. Press to answer the call.

Set the ring delay

You can set the number of times the phone rings before the call goes to the answering machine.

30EN