1 Tap 
from the main menu screen. 2 Select [Ring delay].
3 Select a new setting.
»»The setting is saved.
Note
•• The answering machine needs to be switched on before applying this setting.
Set the sound quality of the message
You can adjust the sound quality of the
messages received from the answering machine. | |||
1 | Tap |
| from the main menu screen. |
| |||
| |||
2 | Select [Message quality]. | ||
3 | Select the new setting. | ||
»»The setting is saved.
Note
•• The sound quality can only be adjusted before recording starts.
•• Depending on the sound quality, the maximum number/length of recorded messages changes. In high quality setting, a maximum of 15 mins of messages can be stored. In the low quality setting, approximately 60 minutes can be stored.
Remote access
You can operate your answering machine when you are away from home. Simply make a call to your phone with a touch tone phone and enter your
Note
•• The remote access PIN code is the same as your system PIN.The preset PIN is 0000.
Activate/deactivate the remote access You can allow or block remote access to the answering machine.
1 | Tap |
| from the main menu screen. |
| |||
| |||
2 | Select [Remote access]. | ||
3 | Tap the switch to turn it on or off. | ||
»»The setting is saved.
Tip
•• When you access the answering machine remotely, you are recommended to set the ring delay to[Toll saver] mode.This is a cost effective way to manage your messages. When there are new messages, the answering machine picks up the call after 3 rings.
When there is no messages, it picks up the call after 5 rings, giving you the opportunity to hang up before a connection is established in case there are no new message.
Change the PIN/passcode | |||
1 | Tap |
| from the main menu screen. |
| |||
| |||
2 | Select [Remote access] > [Change PIN]. | ||
3 | Enter the old remote access PIN/passcode, | ||
4 | then tap [OK] to confirm. | ||
Enter the new remote access PIN/ | |||
5 | passcode, then tap [OK] to confirm. | ||
Enter the new remote access PIN/ | |||
passcode again, then tap [OK] to confirm. »»The setting is saved.
Access the answering machine remotely
1 Make a call to your home number with a touch tone phone.
2 Enter # when you hear the announcement.
3 Enter your PIN code.
»»You now have access to your answering machine, and you can listen to the new messages.
Note
•• You have 2 chances to enter the correct PIN code before your phone hangs up.
4 Press a key to carry out a function. See the Remote access commands table below for a list of available functions.
EN 31