Philips S10A, s10 user manual Auto prefix

4 Select an outgoing line, then press [OK] to confirm.

»»The setting is saved.

»»When you make an outgoing call starting with the prefix number, the pre-selected outgoing line is used.

Set the time
1	Tap from the main menu screen.
2	Select [Call settings] > [Call rules] >
3	[Time based], then press [OK] to confirm.
	Select a time segment.

• from [Recurrence], select an option, then press [OK] to confirm;

• from [Start & end], enter the time duration, press [OK] to confirm.

• from [Select line], select an outgoing line, press [OK] to confirm.

»»The setting is saved.

»»When you make an outgoing call during the time segment defined, the pre-selected line will be used.

Note

•• If you have set both the prefix number and time, the prefix number setting will override the time setting.

Auto prefix

This feature checks and formats your outgoing call number before it is dialed out.The prefix number can replace the detect number you set in the menu. For example, you set 604 as the detect number and 1250 as the prefix. When you have dialed out a number such as 6043338888, your phone changes the number to 12503338888 when it dials out.

Note

•• The maximum length of a detect number is 5 digits.The maximum length of an auto prefix number is 10 digits.

Set auto prefix
1	Tap from the main menu screen.
2	Select [Call settings] > [Auto prefix].
3	Enter the detect number, then tap [OK] to
4	confirm.
	Enter the prefix number, then tap [OK] to

confirm.

»»The setting is saved.

Note

•• This is a country dependent feature.

•• To enter a pause, press and hold #.

•• If the prefix number is set and the detect number is left empty, the prefix number is added to all outgoing calls.

•• The feature is unavailable if the dialed number starts with * and #.

Set the carrier code, area code, country code and domestic code

You can enter these values for your phone's current location if you have used them in entering numbers on your computer. In case you transfer a number to your phone, your phone will use this information to remove these codes from local numbers, as they can lead to unsuccessful calls when dialed on a landline. For example if on your computer you have stored the number +49 40 1234567, with +49

being the local country code and 40 being the

area code, the phone will save that number in

your phone as 040 1234567 (that is, removing
the country code and add a '0' for local
numbers).
1	Tap from the main menu screen.
2	Select [Call settings] > [Carrier
	code]/[Area code]/[Country
3	code]/[Domestic code].
	Enter a code of 4 digits at maximum, then

tap [OK] to confirm. »»The setting is saved.

EN 35