3 Get started
Caution
•• Make sure that you have read the safety instructions in the 'Important safety instructions' section before you connect and install your handset.
Connect the base station
Warning
•• Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or underside of the phone.
•• Use only the supplied power adapter to charge the batteries.
Note
•• If you subscribe to the digital subscriber line (DSL) high speed internet service through your telephone line, ensure you install a DSL filter between the telephone line cord and the power socket.The filter prevents noise and caller ID problems caused by DSL interference. For further information on DSL filters, contact your DSL service provider.
•• The type plate is located on the bottom of the base station.
1 Connect the power adapter to:
•the DC input jack at the bottom of the base station;
•the power socket on the wall.
2 Connect the line cord to:
•the telephone socket at the bottom of the base station;
•the telephone socket on the wall.
6EN
3 Connect the power adapter to (for extra handset versions only):
•the DC input jack at the back of the extra handset charger.
•the power socket on the wall.
Install the handset
Your handset comes with a high quality Lithium Ion Polymer battery to maximize battery lifetime. However, over time the capacity