Philips s10, S10A user manual Sounds

15 Sounds

Set the handset's ringtone volume

You can select among 5 ringtone volume levels,

(	) (that is, the ringtone starts soft and gets
louder over time if the call is not answered).
1	Tap	from the main menu screen.
2	Select [Ring volume].
3	Select [Home] for the landline or one of
4	the mobile lines.
	Press +/- on the left side of the handset

to select a volume level, then tap [OK] to confirm.

»»The setting is saved.

Note

•• The ringtone volume is off when you set it to the lowest level.

Set the handset's ringtone

You can select from multiple ringtones.
1	Tap	from the main menu screen.
2	Select [Ring Tone].
3	Select [Home] for the landline or one of
4	the mobile lines.
	Select a ringtone.

»»The setting is saved.

Note

•• You can assign ringtones to specific contacts to identify them (see 'Set the personalized ringtone' on page 23).

Set your sound preferences

You can set the sound in the earpiece or

handsfree mode among 5 different profiles
using the [MySound Pro] application.
1	Tap	from the main menu screen.
2	Select [MySound Pro].
3	Select a profile.

»»The setting is saved.

Tip

•• You can also access [MySound Pro] directly from the main menu screen (see 'Set your sound preferences' on page 41).

Set the key tone

Key tone is the sound made when you press a
key on the handset.
1	Tap	from the main menu screen.
2	Select [Key tone], then tap on the switch
	to turn it on/off.
	»»The setting is saved.

Set the docking tone

The docking tone is the sound made when you place the handset on the base station or charger.

1	Tab	from the main menu screen.
2	Select [Docking tone], then then tap on

the switch to turn it on/off. »»The setting is saved.

40EN