Philips CD140 manual Install rechargeable Batteries, Slide out the battery cover

Page 13

3Connect the other end of the line cord to the telephone line socket and the other end of the power cable to the electricity socket.

Note

The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.

3.2Install rechargeable

batteries

Your CD140 is supplied with two rechargeable batteries. Before using the handset, install the batteries into the handset and fully charged them up.

1Slide out the battery cover

2Place the batteries as indicated in the battery compartment and replace the battery cover.

3.3Place the handset on the charging cradle

Charge the handset for at least 24 hours before using it for the first time.

When the battery is fully charged, the talk time of your CD140 is approximately 12 hours and the standby time is approximately 120 hours.

1Place the handset on the charging cradle of the base

station.

3When the handset is fully

charged,

is displayed.

Getting started

11

Image 13

Contents EN Digital Cordless Telephone CD140Page Table of contents Easily accessible Power requirementsUse one of the following disposal options National recovery & recycling systemDisposal instructions for batteries Electric, Magnetic and Electromagnetic Fields EMF Using GAP standard CompliancePage Telephone handset Base station What’s in the boxLine cord BatteriesPhonebook key Overview of the phone Handset ACall Log keyTalk key Redial/Flash key HHash key Alphanumeric keypad GStar key Call Transfer / Intercom Conference Program keyBase station Key Display icons on the handsetConnect the base Station Getting startedSlide out the battery cover Install rechargeable BatteriesStation When the handset is fully Charged Phone Configure yourRegister your handset TipCall is initiated Make a call PrediallingDirect dialling Call from the call logHow to answer a Second call How to make a second call During a callCall from the redial list End a callHow to make an Internal call How to use IntercomDuring the conference call 1 Press to put How to find a handsetExternal call is put on hold automatically Call in progress Mute/Unmute microphone During a call How to adjust earpiece volume During a callIs shown on the display Number is saved Selected memory locationHow to edit the phonebook entry or Delete a number How to access the phonebook Idle modeHow to delete Entire phonebook All the phonebook entries are deletedHow to delete the entire call log How to access Call logHow to access Redial list Settings How to set the timeHow to set How to set the ring volumeHow to activate/deactivate Keypad lock How to select recall timeCurrent settings are displayed How to select dial modeHow to turn On/turn off the key tone How to set the auto prefixHow to access your voice mail number How to program voice mailbox NumberHow to restore to default settings Your phone is reset to its default settingsDefault settings Items Default values Phone does not work at all Connection Handset does not switch onCommunication is lost during a call Poor audio qualitySet-up Caller ID does not work properly AppearsCall Waiting call cannot be answered Handset displays nothing, but only the is blinkingNoise interference on your radio or television Caller does not hear mePhonebook entry cannot be stored Handset is unable to registerPage

Related manuals

Manual 32 pages 62.51 Kb