Philips CD140 Connection Handset does not switch on, Phone does not work at all, No dialling tone

Page 27

6Frequently asked questions

In this chapter you will find the most frequently asked questions and answers about your phone.

Connection

The handset does not switch on!

•Charge the battery: Put the handset on charger. After a few moments the phone will switch on

•Check the charger connections

•Use only the SUPPLIED RECHARGEABLE BATTERIES

The phone does not work at all.

•Make sure that the adaptor and the phone cord are connected properly

•Check that the batteries are fully charged and installed properly

•This phone does not work during power failure.

Communication is lost during a call!

•Charge the SUPPLIED RECHARGEABLE BATTERIES

•Move closer to the base station

Poor audio quality

•Move closer to the base station

•Move the base station at least one metre away from any electrical appliances

No dialling tone

•Check the connections. Reset the phone: unplug and plug back in the mains

•Charge the batteries for at least 24 hours

•Move closer to the base station

Frequently asked questions

25

Image 27

Contents EN Digital Cordless Telephone CD140Page Table of contents Easily accessible Power requirementsNational recovery & recycling system Use one of the following disposal optionsDisposal instructions for batteries Electric, Magnetic and Electromagnetic Fields EMF Using GAP standard CompliancePage Batteries What’s in the boxTelephone handset Base station Line cordRedial/Flash key Overview of the phone Handset ACall Log keyPhonebook key Talk keyProgram key Alphanumeric keypad GStar keyHHash key Call Transfer / Intercom ConferenceBase station Key Display icons on the handsetConnect the base Station Getting startedInstall rechargeable Batteries Slide out the battery coverStation When the handset is fully Charged Phone Configure yourRegister your handset TipCall from the call log Make a call PrediallingCall is initiated Direct diallingEnd a call How to make a second call During a callHow to answer a Second call Call from the redial listHow to make an Internal call How to use IntercomHow to find a handset During the conference call 1 Press to putExternal call is put on hold automatically Number is saved Selected memory location How to adjust earpiece volume During a callCall in progress Mute/Unmute microphone During a call Is shown on the displayAll the phonebook entries are deleted How to access the phonebook Idle modeHow to edit the phonebook entry or Delete a number How to delete Entire phonebookSettings How to set the time How to access Call logHow to delete the entire call log How to access Redial listHow to select recall time How to set the ring volumeHow to set How to activate/deactivate Keypad lockHow to set the auto prefix How to select dial modeCurrent settings are displayed How to turn On/turn off the key toneYour phone is reset to its default settings How to program voice mailbox NumberHow to access your voice mail number How to restore to default settingsDefault settings Items Default values Poor audio quality Connection Handset does not switch onPhone does not work at all Communication is lost during a callHandset displays nothing, but only the is blinking AppearsSet-up Caller ID does not work properly Call Waiting call cannot be answeredHandset is unable to register Caller does not hear meNoise interference on your radio or television Phonebook entry cannot be storedPage

Related manuals

Manual 32 pages 62.51 Kb