Philips CD140 manual Tip, Register your handset

Page 15

Code	Country
26	Slovenia

27	Croatia

28	Bulgaria

29	Serbia

30	Singapore

31	Indonesia

32	Malaysia

35	Australia

36	New Zealand

39	Brazil

40	Mexico

Note

Once the country is selected, the default line settings for the selected country will be applied to your phone automatically.

Tip

If you chose the country in use wrongly or would like to change the country after the first configuration, you can press , , enter 4-digit PIN code (default PIN is 0000) and press in idle mode to its default settings.The handset will go back to country code selection screen and you can select the country code again. If

country selection is not needed, the handset will go back to idle screen after reset.

3.5Register your handset

You will need to register your new handset or if you wish to register the handset to a different base unit.You can register up to four handsets on a single base station. Before entering the 4-digit PIN, press on the base unit for around three seconds when the base is in standby mode.

1Press ,

2Enter the default or existing 4-digit PIN code. (Default PIN is 0000)

3 Press to start registration

Note

If the PIN code you entered is incorrect, a long beep is emitted and the phone returns to standby mode.

Getting started

13

Image 15

Contents EN Digital Cordless Telephone CD140Page Table of contents Easily accessible Power requirementsNational recovery & recycling system Use one of the following disposal optionsDisposal instructions for batteries Electric, Magnetic and Electromagnetic Fields EMF Using GAP standard CompliancePage Batteries What’s in the boxTelephone handset Base station Line cordRedial/Flash key Overview of the phone Handset ACall Log keyPhonebook key Talk keyProgram key Alphanumeric keypad GStar keyHHash key Call Transfer / Intercom ConferenceBase station Key Display icons on the handsetConnect the base Station Getting startedInstall rechargeable Batteries Slide out the battery coverStation When the handset is fully Charged Phone Configure yourRegister your handset TipCall from the call log Make a call PrediallingCall is initiated Direct diallingEnd a call How to make a second call During a callHow to answer a Second call Call from the redial listHow to make an Internal call How to use IntercomHow to find a handset During the conference call 1 Press to putExternal call is put on hold automatically Number is saved Selected memory location How to adjust earpiece volume During a callCall in progress Mute/Unmute microphone During a call Is shown on the displayAll the phonebook entries are deleted How to access the phonebook Idle modeHow to edit the phonebook entry or Delete a number How to delete Entire phonebookSettings How to set the time How to access Call logHow to delete the entire call log How to access Redial listHow to select recall time How to set the ring volumeHow to set How to activate/deactivate Keypad lockHow to set the auto prefix How to select dial modeCurrent settings are displayed How to turn On/turn off the key toneYour phone is reset to its default settings How to program voice mailbox NumberHow to access your voice mail number How to restore to default settingsDefault settings Items Default values Poor audio quality Connection Handset does not switch onPhone does not work at all Communication is lost during a callHandset displays nothing, but only the is blinking AppearsSet-up Caller ID does not work properly Call Waiting call cannot be answeredHandset is unable to register Caller does not hear meNoise interference on your radio or television Phonebook entry cannot be storedPage

Related manuals

Manual 32 pages 62.51 Kb